Hotpoint HIO 3T241 WFEGT UK Reference Guide
![Hotpoint HIO 3T241 WFEGT UK Dishwasher manual cover](/images/vgDkmdonvffQqEGICjPnHXQT/thumbs/thumb175x175.webp)
To reset your Hotpoint dishwasher, press and hold the reset button on the control panel for about 3 seconds. This will clear any existing settings and restart the dishwasher.
Check for blockages in the drain hose or filter. Clean them thoroughly to ensure there is no debris obstructing the water flow. Additionally, make sure the drain hose is not kinked.
It is recommended to clean the filter every month to maintain optimal performance and prevent unpleasant odors.
Spots on dishes are often caused by hard water. Use a rinse aid to help prevent spotting and consider installing a water softener if the problem persists.
Loud noise can be due to items in the dishwasher that are not properly secured or touching each other. Ensure all items are correctly loaded and not obstructing the spray arms.
To enhance drying performance, ensure you are using rinse aid and select a drying cycle with a higher temperature setting if available. Proper loading also helps improve drying efficiency.
Ensure the door is properly closed and latched. Check that the dishwasher is plugged in and that the circuit breaker has not tripped. Also, verify that the water supply is turned on.
Remove the spray arms and rinse them under warm water to clear any blockages. Use a small brush to clean the nozzles and remove any debris.
No, regular dish soap can cause excessive suds and overflow. Always use dishwasher-specific detergent for best results and to avoid damaging your appliance.
Clean the exterior with a soft damp cloth and mild detergent. Avoid using abrasive cleaners or scouring pads, as they can scratch the surface.