Hotpoint HFC 3T232 WFG X UK Reference Guide
![Hotpoint HFC 3T232 WFG X UK Dishwasher manual cover](/images/LzuabxMQedYLHVSRaQoUQPZp/thumbs/thumb175x175.webp)
Ensure that large items do not block the spray arms, and place dishes so that the surfaces face downward or towards the center of the dishwasher. Avoid overcrowding to allow water and detergent to reach all surfaces.
Check the filter and drain hose for blockages, ensure that the sink drain is clear, and make sure the dishwasher is level. If the problem persists, consult the troubleshooting section in your user manual.
Regularly clean the filter and spray arms, inspect and clean the door seals, and run a cleaning cycle with dishwasher cleaner to remove any buildup of grease and limescale.
Ensure that there is adequate rinse aid in the dispenser, select a drying option if available, and slightly open the door after the cycle ends to allow steam to escape.
This could be due to hard water. Make sure to use a high-quality dishwasher detergent and adjust the rinse aid setting. Consider using a water softener if your area has very hard water.
Clean the filter and interior, ensure there is no food debris trapped in the machine, and consider running a cycle with a dishwasher cleaner or a cup of white vinegar.
It is recommended to use high-quality, tablet or powder dishwasher detergents. Avoid using regular dish soap as it can create excessive suds.
To reset the dishwasher, unplug it from the power outlet, wait for about 1 minute, and then plug it back in. If the problem persists, consult the user manual or contact customer support.
Check for any loose items in the dishwasher that might be rattling, ensure that the spray arms are not hitting any dishes, and inspect the filter for obstructions.
Check that the spray arms are not clogged, ensure the correct amount of detergent is used, and verify that the water temperature is adequate (ideally above 120°F or 49°C).