Hotpoint HFC 2B19 UK N D Reference Guide
![Hotpoint HFC 2B19 UK N D Dishwasher manual cover](/images/ehkWTtnlmUyUJSxoipEIrfvO/thumbs/thumb175x175.webp)
To start a wash cycle, first load your dishes and detergent, then close the door. Select your desired wash program using the program selector knob and press the start button. The dishwasher will begin the selected cycle.
Ensure the dishwasher is properly plugged in and the door is fully closed. Check that the water supply is turned on and there are no tripped circuit breakers. If the problem persists, consult the user manual or contact customer support.
To clean the filter, remove the bottom rack and twist the cylindrical filter counterclockwise to lift it out. Rinse it under running water to remove debris. Reassemble the filter by placing it back and turning it clockwise until it clicks into place.
The eco mode is designed to efficiently clean dishes while using less water and energy. It might take longer than standard cycles but is more environmentally friendly.
Ensure that you are using a rinse aid, as it helps with the drying process. Check that the selected wash program includes a drying phase and avoid unloading the dishwasher immediately after the cycle ends.
Check the door seal for any visible damage and ensure it is clean. Verify that the dishwasher is level and that the spray arms can rotate freely. Inspect hoses and connections for leaks. If the issue persists, consult a technician.
Regular maintenance includes cleaning the filter, checking and cleaning the spray arms, wiping down the door seal, and inspecting the racks for damage. It is also advisable to run a dishwasher cleaner cycle monthly.
To adjust the height of the upper rack, lift the rack upwards to the desired height and ensure it clicks into place. This allows for additional space for larger items in the lower rack.
Make sure the spray arms are not blocked and can rotate freely. Verify that you are using an appropriate amount of detergent and that it is fresh. Ensure dishes are loaded correctly without blocking spray arms.
Refer to the user manual to locate the settings for sound notifications. Some models allow you to adjust or mute these sounds through the control panel.