Currys Essentials CID45B16A Installation Guide
![Currys Essentials CID45B16A manual cover](/images/NoyXeQPgSpLpgCLGFUungZCc/thumbs/thumb175x175.webp)
To reset your Currys Essentials CID45B16A Dishwasher, press and hold the Start button for about 3 seconds until the display changes. This will cancel the current cycle and reset the dishwasher.
Check if the drain hose is kinked or blocked. Also, ensure that the sink drain is not clogged. Clean the filter and pump area in the dishwasher to remove any debris.
Ensure that the dishwasher is properly plugged in and that the door is fully closed and latched. Check if the circuit breaker is tripped or if the fuse is blown.
Use a rinse aid to enhance drying performance. Ensure that the dishes are loaded correctly, allowing proper air circulation. Select a cycle with a higher temperature setting if available.
Ensure that you are using the correct amount of detergent and a quality rinse aid. Hard water might require more rinse aid to prevent spots.
It is recommended to clean the filter once a month to ensure optimal performance and prevent clogs.
Run a cleaning cycle with a dishwasher cleaner or a mixture of vinegar and baking soda. Ensure to clean the filter and check for any trapped food particles.
No, you should not use regular dish soap in a dishwasher as it can cause excessive suds and potentially damage the appliance. Use only dishwasher-specific detergents.
Place larger items like pots and pans on the bottom rack and smaller items like glasses and bowls on the top rack. Ensure that items are not blocking the spray arms.
Check if any items are improperly loaded and hitting the spray arms. Ensure that the dishwasher is level and that no foreign objects are in the pump or filter area.