Currys Essentials CDWTT11 Instruction Manual
![Currys Essentials CDWTT11 manual cover](/images/uBVUUDZrQQLLEtIrzppaEuLY/thumbs/thumb175x175.webp)
To reset the Currys Essentials CDWTT11 dishwasher, turn off the power by unplugging it or switching off the circuit breaker. Wait for about 5 minutes before turning the power back on. This should reset the dishwasher.
Check for any blockages in the drain hose or filter. Ensure that the drain hose is not kinked or clogged. Also, inspect the dishwasher's sink connection for any obstructions. Clean the filter and remove any debris.
To clean the filter, first remove the lower dish rack. Twist the cylindrical filter counterclockwise and lift it out. Rinse it under running water to remove debris and clean with a soft brush if needed. Reinstall the filter by placing it back and twisting it clockwise to lock it in place.
Use a high-quality dishwasher detergent that is suitable for use in automatic dishwashers. You can use either powdered, liquid, or tablet detergents. Avoid using regular dish soap as it may cause excessive sudsing.
Spots on glassware can be caused by hard water. Use a rinse aid to help prevent spots and enhance drying. Also, ensure that you are using the correct amount of detergent and that the dishwasher's salt reservoir is filled if your model requires dishwasher salt.
To improve drying performance, ensure that you are using a rinse aid and select a cycle with a higher temperature setting for drying. Also, make sure that plastic items are placed in the top rack to prevent them from blocking the hot air circulation.
Ensure that the dishwasher is properly plugged in and that the circuit breaker has not tripped. Check if the door is fully closed and latched. Verify that the water supply is turned on and that the dishwasher's control settings are correct.
It's recommended to clean the spray arms every few months to prevent blockages. Remove the arms and rinse them under running water. Use a toothpick or small brush to clear any blocked holes. Reattach the spray arms securely after cleaning.
Regular maintenance includes cleaning the filter and spray arms, checking for leaks, and inspecting the door seals for wear. Run an empty cycle with a dishwasher cleaner every few months to prevent buildup of limescale and odors.
Load larger items like pots and pans on the bottom rack, facing downwards. Place cups and glasses on the top rack, angled to allow water to drain. Avoid overcrowding and ensure that nothing obstructs the spray arms. Utensils should be placed in the cutlery basket with handles facing down.