Amana ACR2303MFW Control Guide
![Amana ACR2303MFW Range manual cover](/images/mIZZHChirZOlZljWfuGcbrul/thumbs/thumb175x175.webp)
To clean your Amana ACR2303MFW Range, ensure all knobs are in the off position and the range is cool. Use a damp cloth with mild soap to wipe the surfaces. Avoid using abrasive cleaners or steel wool as they can scratch the surface.
If the oven is not heating, first check that it is properly plugged in and that the circuit breaker is not tripped. Ensure the oven settings are correct. If the problem persists, it may be a faulty heating element, and professional service is recommended.
To replace the oven light, first disconnect the range from the power source. Remove the glass cover over the light bulb in the oven, unscrew the old bulb, and replace it with a new 40-watt appliance bulb. Reattach the cover and restore power.
Regularly clean spills and crumbs to prevent buildup. Inspect and clean burner grates and drip pans monthly. Check the oven door gasket for damage to ensure proper sealing. Schedule professional maintenance annually.
Yes, aluminum foil can be used in the oven, but do not cover the oven bottom or entire rack with foil as it can cause uneven cooking and damage the oven. Use it only to prevent spills on a baking sheet.
Ensure the range is plugged in and the gas supply is on. Check that the burner caps are properly placed. Clean the igniter with a brush to remove debris. If the issue continues, the igniter or switch may need replacement.
To set the clock, press the 'Clock' button. Use the 'Temp/Time' up or down arrow pads to set the correct time. Press 'Clock' again to confirm. Ensure the range is powered to set the clock.
First, check if the range is properly plugged in and the circuit breaker is not tripped. Try resetting the control panel by unplugging the range for one minute and plugging it back in. If the issue persists, professional service may be needed.
Ensure the anti-tip bracket is installed correctly. The range should be slid back so the rear leveling leg engages with the bracket. This prevents the range from tipping forward when pressure is applied to the open door.
Check for obstructions around the door and ensure the oven racks are in the correct position. Inspect the door gasket for damage or debris. If the door hinges are misaligned, they may require adjustment or replacement.