KORG ST-H30-BK Assembly Instructions
![KORG ST-H30-BK manual cover](/images/b190977d202c42b9265d502c/thumbs/thumb175x175.webp)
To set up the KORG ST-H30-BK for optimal stability, ensure that the legs are fully extended and locked into place. Adjust the height using the secure locking mechanism and ensure that the base is on a flat, even surface.
To clean the KORG ST-H30-BK, use a soft, damp cloth to wipe down the surfaces. Avoid using harsh chemicals. Regularly check the joints and screws for any signs of wear or loosening and tighten as necessary.
If your KORG ST-H30-BK is wobbling, ensure all legs are evenly extended and locked. Check for loose screws or connections and tighten them. Make sure the stand is placed on an even surface.
If the height adjustment mechanism is stuck, gently apply lubricant to the moving parts and try to adjust it again. If the problem persists, inspect for any obstructions or damage.
Yes, the KORG ST-H30-BK can support other equipment such as mixers or speakers, as long as the weight does not exceed the stand's specified limit and fits securely on the surface.
The KORG ST-H30-BK is designed to support a maximum weight of 100 kg. Ensure the equipment placed on it does not exceed this limit to maintain safety and stability.
To prevent scratches, regularly clean the stand and avoid placing sharp objects directly on it. Using protective pads or covers can also help minimize direct contact with hard surfaces.
If the legs do not lock properly, inspect the locking mechanism for any debris or damage. Clean and lubricate the mechanism if necessary. Ensure the locking pins are fully engaged.
To adjust the height, unlock the adjustment mechanism, set the desired height, and then securely lock the mechanism in place to ensure stability and safety.
While the KORG ST-H30-BK can be used outdoors, it should be protected from extreme weather conditions. Ensure it is on a stable, flat surface and avoid exposure to moisture to prevent rust and damage.