Husqvarna Flail Mower 966 79 65-01 Instructions
![Husqvarna Flail Mower 966 79 65-01 Lawn Mower manual cover](/images/pBlNfksLSQDderbXwIAhGuNX/thumbs/thumb175x175.webp)
To start the Husqvarna Flail Mower, ensure the fuel tank is filled, the oil level is adequate, and the battery is charged. Set the throttle to the choke position, turn the ignition key to the start position, and release it once the engine starts.
Regularly inspect the blade for sharpness and damage. Sharpen the blade using a proper sharpening tool and replace it if it shows signs of excessive wear or cracks. Always disconnect the spark plug before performing blade maintenance.
Check the fuel level and quality, inspect the spark plug for fouling, ensure the air filter is clean, and verify the battery charge. If the issue persists, consult the user manual or contact a professional technician.
Remove the air filter cover, take out the filter, and clean it using compressed air or wash it with soapy water if it’s washable. Ensure it is completely dry before reinstalling. Replace if heavily soiled or damaged.
Use high-quality SAE 30 oil for general use, or SAE 10W-30 for varying temperature ranges. Always check the user manual for specific recommendations based on operating conditions.
Regularly clean the underside of the mower deck to prevent grass buildup. Mow when the grass is dry and adjust the cutting height to prevent cutting too much grass at once.
Clean the mower thoroughly, change the oil, remove the battery, and store it in a dry, cool place. Add a fuel stabilizer to the tank to prevent fuel degradation.
The spark plug should be inspected every season and replaced every 100 hours of operation or annually, whichever comes first. Use a spark plug recommended by the manufacturer.
Wear protective gear including goggles and gloves, ensure the area is clear of people and pets, and avoid mowing on steep slopes. Always follow the safety instructions in the user manual.
Locate the cutting height adjustment levers or knobs on the mower. Adjust them to your desired height setting, ensuring both sides are set equally for an even cut.