Etrovision AC-MF7 Data Sheet
![Etrovision AC-MF7 ANPR Reader manual cover](/images/bOHQQjLLemPYOgQCinjkgRtj/thumbs/thumb175x175.webp)
To install the Etrovision AC-MF7 ANPR Reader, mount the device securely at the desired location, connect it to the network using an Ethernet cable, and power it on. Follow the setup wizard instructions to configure the network settings.
Ensure the camera lens is clean and unobstructed, check that the ANPR software is properly configured, and verify that the lighting conditions are adequate for license plate recognition.
Download the latest firmware from the Etrovision website, access the device's web interface, navigate to the firmware update section, and upload the downloaded firmware file. Follow the on-screen instructions to complete the update.
Regularly clean the camera lens, check and tighten all connections, update the firmware, and perform periodic checks on the software settings to ensure optimal performance.
Locate the reset button on the device, press and hold it for about 10 seconds until the device restarts. This will reset all configurations to factory defaults.
Yes, the Etrovision AC-MF7 ANPR Reader supports integration with third-party software via API and SDKs, which are available from the manufacturer.
Access the device's web interface through a browser, navigate to the network settings section, and configure the IP address, subnet mask, gateway, and DNS settings as required.
Check the power connection and ensure the power adapter is working. Verify the outlet is functional and try using a different power source.
Log into the device's web interface using a web browser, navigate to the live view section, and adjust the settings to view the live video feed.
Check the network connection for stability and bandwidth issues, reduce the video resolution or frame rate if necessary, and ensure that the device firmware and software are up to date.