Epson LS100 Quick SetUp Guide

Pages 4

Year 2017

Language(s)

of 4

User's Guide

209 pages

Quick Setup Guide

4 pages

Quick Setup Guide

4 pages

Page 1

Quick Setup Before using the projector, make sure you read the safety instructions in the online Users Guide.

Connect the projector Choose from the following connections. See the sections below or the online Users Guide for details.

Video device Connect multiple video devices and use the Source Search button on the projector or remote control to switch between them.

Component video to VGA cable

HDMI cable

RCA video cable (composite video)

Mobile media device Connect tablets, smartphones, and other devices that support the MHL standard to the HDMI1/MHL port.

MHL cable

Streaming device

Some devices may require an adapter or may not require an MHL cable. Not all features or functions may be supported. Check your devices documentation for more information.

Computer Connect one end of an HDMI cable to one of the projectors HDMI ports and the other end to an HDMI port on your computer.

HDMI cable

Note: For more information on connecting the projector to your computer or other devices (camera, USB flash drive, etc.), see the online Users Guide.

Connect audio Built-in speaker The projector has a built-in speaker that can play audio from a video source (DVD player, streaming device, etc.) connected by an HDMI cable. If you do not use an HDMI connection, you must connect your devices audio output to the projectors audio input.

HDMI cable

RCA audio cable

External speakers Connect your devices audio output to your home theater receiver or powered speakers.

Note: The internal speaker is disabled when an external device is connected. If you are using an HDMI connection to the projector, you may need to reduce the projector speaker volume to zero (0), or make sure that the correct audio output is selected on your device.

Home theater system

Video source

Surround sound Receiver Projector

Video cable

Powered speakers

External speakers Video source Projector

Video cable

Note: See your home theater receiver documentation for more information on connections.

Turn on your equipment 1 Turn on your video source or computer.

2 Plug in the projector. The power light on the projector turns blue.

3 Press the power button on the projector or remote control. The projector beeps, and the Status light flashes blue and then stays on.

Note: To shut down the projector, press the power button twice.

4 Use the arrow buttons on the remote control to highlight any options on the Home screen that appears, then press to select it. You can switch between projection sources and quickly access various adjustment options from this screen.

5 The default language of the menu system is English. To select another language, press the Menu button on the projector or remote control. Select Extended and press . Select Language and press . Select your language and press . Press the Menu button to exit the menu system.

Adjust the image 1 If you dont see an image, press the Source Search button on the

projector or remote control to select the image source.

Note: If you still see a blank screen or have other display problems, see the tips in Troubleshooting on the back of this sheet.

2 To adjust the image height, rotate the front or rear feet to raise or lower them.

3 To reduce or enlarge the image, press the T (reduce) or W (enlarge) button on the projector.

4 If you need to focus the image, first slide the switch on the side of the projector to open the air filter cover. Then raise or lower the focus lever to sharpen the image.

5 If your image is uneven on the sides, you can use the keystone correction feature to adjust the image. To use this feature, press the or button to display the keystone correction screen. Then press the W or T button to correct for horizontal keystone distortion and the or button to correct for vertical keystone distortion. See the online Users Guide for details.

Using the remote control Install the batteries as shown (two AA batteries).

Choose which source to display

Turn projector on and off

Access projector menus

Turn off projector display

Access the Home screen

Navigate projector menus

For more information on using the remote control, see the online Users Guide.

Home Cinema LS100

Page 2

Quick Setup Before using the projector, make sure you read the safety instructions in the online Users Guide.

Connect the projector Choose from the following connections. See the sections below or the online Users Guide for details.

Video device Connect multiple video devices and use the Source Search button on the projector or remote control to switch between them.

Component video to VGA cable

HDMI cable

RCA video cable (composite video)

Mobile media device Connect tablets, smartphones, and other devices that support the MHL standard to the HDMI1/MHL port.

MHL cable

Streaming device

Some devices may require an adapter or may not require an MHL cable. Not all features or functions may be supported. Check your devices documentation for more information.

Computer Connect one end of an HDMI cable to one of the projectors HDMI ports and the other end to an HDMI port on your computer.

HDMI cable

Note: For more information on connecting the projector to your computer or other devices (camera, USB flash drive, etc.), see the online Users Guide.

HDMI cable

RCA audio cable

External speakers Connect your devices audio output to your home theater receiver or powered speakers.

Home theater system

Video source

Surround sound Receiver Projector

Video cable

Powered speakers

External speakers Video source Projector

Video cable

Note: See your home theater receiver documentation for more information on connections.

Turn on your equipment 1 Turn on your video source or computer.

2 Plug in the projector. The power light on the projector turns blue.

3 Press the power button on the projector or remote control. The projector beeps, and the Status light flashes blue and then stays on.

Note: To shut down the projector, press the power button twice.

Adjust the image 1 If you dont see an image, press the Source Search button on the

projector or remote control to select the image source.

Note: If you still see a blank screen or have other display problems, see the tips in Troubleshooting on the back of this sheet.

2 To adjust the image height, rotate the front or rear feet to raise or lower them.

3 To reduce or enlarge the image, press the T (reduce) or W (enlarge) button on the projector.

4 If you need to focus the image, first slide the switch on the side of the projector to open the air filter cover. Then raise or lower the focus lever to sharpen the image.

Using the remote control Install the batteries as shown (two AA batteries).

Choose which source to display

Turn projector on and off

Access projector menus

Turn off projector display

Access the Home screen

Navigate projector menus

For more information on using the remote control, see the online Users Guide.

Home Cinema LS100

Page 3

5. EXCLUSION OF DAMAGES; EPSONS MAXIMUM LIABILITY: IN NO EVENT SHALL EPSON OR ITS AFFILIATES BE LIABLE FOR ANY SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES OR ANY LOST PROFITS RESULTING FROM THE USE OR INABILITY TO USE THE EPSON PRODUCT, WHETHER RESULTING FROM BREACH OF WARRANTY OR ANY OTHER LEGAL THEORY. IN NO EVENT SHALL EPSON OR ITS AFFILIATES BE LIABLE FOR DAMAGES OF ANY KIND IN EXCESS OF THE ORIGINAL RETAIL PURCHASE PRICE OF THE PRODUCT.

6. Disputes, Arbitration, Governing Laws:

A. Any controversy or claim arising out of or relating to Epson products or services or this agreement, shall be resolved by arbitration, rather than in court, in Los Angeles County, California. If you or Epson commences arbitration, the arbitration shall be governed by the rules of JAMS that are in effect when the arbitration is filed, excluding any rules that permit arbitration on a class or representative basis, available at http://www.jamsadr.com or by calling 1-800-352-5267, and under the rules set forth in this agreement. Disputes shall be resolved by a single neutral arbitrator, and both parties shall have a reasonable opportunity to participate in the selection of the arbitrator. The arbitrator is bound by the terms of this agreement.

B. Pre-Arbitration Steps and Notice. Before submitting a claim for arbitration, you agree to try, for sixty (60) days, to resolve any dispute informally by contacting us at [email protected]. Please include your name, address and contact information, the facts giving rise to the dispute, and the relief requested. You agree to act in good faith to resolve the dispute, but if you and Epson do not reach a resolution within the sixty (60) days, you may commence an arbitration.

C. Opt-out. You may elect to opt out (exclude yourself) from the final, binding, individual arbitration procedure and waiver of class and representative proceedings specified in this agreement by sending a written letter to Epson America, Inc., ATTN: Legal Department, 3840 Kilroy Airport Way, Long Beach, CA 90806, within thirty (30) days of your purchase of the Epson products and/or services that specifies (i) your name, (ii) your mailing address, and (iii) your request to be excluded from the final, binding individual arbitration procedure and waiver of class and representative proceedings specified in this Section 6. In the event that you opt out consistent with the procedure set forth above, all other terms shall continue to apply, including the requirement to provide notice prior to litigation.

D. Judgment on the arbitration award may be entered in any court having jurisdiction. There is no judge or jury in arbitration and your grounds for appeal are limited, however, the arbitrator is empowered to grant relief and award you the same damages as a court could, including declaratory or injunctive relief.

E. Notwithstanding the foregoing, you may bring an individual action in a small claims court of your state or municipality if the action is within that courts jurisdiction and is pending only in that court.

F. Any action must be brought within three (3) months of the expiration of the warranty.

G. You and Epson each agree that any dispute resolution proceedings will be conducted only on an individual basis and not in a class, consolidated or representative action. If for any reason a claim proceeds in court rather than in arbitration, we each waive any right to a jury trial. We also both agree that you or Epson may bring suit in court to enjoin infringement or other misuse of intellectual property rights.

H. If any provision in this Section 6 is found to be unenforceable, that provision shall be severed with the remainder of this agreement remaining in full force and effect. The foregoing shall not apply to the prohibition against class, consolidated or representative actions in Section 6G above. This means that if Section 6G is found to be unenforceable, then all of Section 6, except for this paragraph H, shall be null and void.

7. Other Provisions:

A. Other Rights You May Have: This warranty gives you specific legal rights, and you may also have other rights which vary from jurisdiction to jurisdiction. Some jurisdictions do not allow limitations on how long an implied warranty lasts, or allow the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to you.

B. Warranties in Canada: In Canada, warranties include both warranties and conditions.

C. Except for Section 6, which is governed by the Federal Arbitration Act, in the event of a dispute in which the provisions of Section 6 are inapplicable, severed from the remainder of this agreement, or you opt out pursuant to Section 6C, you and Epson both consent to the jurisdiction of your state of residence.

To find the Epson Authorized Reseller nearest you, please visit: www.epson.com in the U.S. or www.epson.ca in Canada.

To find the Epson Customer Care Center nearest you, please visit www.epson.com/servicecenterlocator in the U.S. or www.epson.ca/servicecenterlocator in Canada.

To contact the Epson ConnectionSM, please call (800) 637-7661 or (562) 276-4394 in the U.S. and (905) 709-3839 in Canada or write to Epson America, Inc., P.O. Box 93012, Long Beach, CA 90809-3012.

Troubleshooting If you see a blank screen or the No signal message after turning on your computer or video device, check the following:

Make sure the Status light on the projector is blue and not flashing.

Press the Source Search button on the projector or remote control to switch to the correct image source, if necessary.

Press the Home button on the projector or remote control to verify the source input and settings.

On Windows 7 or later, hold down the Windows key and press P at the same time, then click Duplicate.

If youre using a Windows laptop, press the function key on your keyboard that lets you display on an external monitor. It may be labeled CRT/LCD or have an icon such as . You may have to hold down the Fn key while pressing it (such as Fn + F7). Wait a moment for the display to appear.

If youre using a Mac laptop, open System Preferences and select Displays. Click the Arrangement tab and select the Mirror Displays checkbox.

Where to get help Manuals For more information about using the projector, see the online manuals. You can view or download the manuals from the Epson website, as described below.

Internet support services Visit www.epson.com/support (U.S.) or www.epson.ca/support (Canada) and search for your product to download software and utilities, view manuals, get FAQs and troubleshooting advice, or contact Epson.

Telephone support To use the Epson PrivateLine Support service, call (800) 637-7661. This service is available for the duration of your warranty period. You may also speak with a support specialist by calling (562) 276-4394 (U.S.) or (905) 709-3839 (Canada).

Support hours are 6 am to 8 pm, Pacific Time, Monday through Friday, and 7 am to 4 pm, Pacific Time, Saturday. Days and hours of support are subject to change without notice. Toll or long distance charges may apply.

Registration Register today to get product updates and exclusive offers. You can register online at www.epson.com/webreg.

Optional accessories For a list of optional accessories, see the online Users Guide.

You can purchase screens or other accessories from an Epson authorized reseller. To find the nearest reseller, call 800-GO-EPSON (800-463-7766). Or you can purchase online at www.epsonstore.com (U.S. sales) or www.epsonstore.ca (Canadian sales).

EPSON is a registered trademark and EPSON Exceed Your Vision is a registered logomark of Seiko Epson Corporation. PrivateLine is a registered trademark and Epson Connection is a service mark of Epson America, Inc.

Mac is a trademark of Apple Inc., registered in the U.S. and other countries.

General Notice: Other product names used herein are for identification purposes only and may be trademarks of their respective owners. Epson disclaims any and all rights in those marks.

This information is subject to change without notice.

2017 Epson America, Inc., 8/17

Printed in XXXXXX CPD-54349

Notices Declaration of Conformity According to 47CFR, Part 2 and 15, Class B Personal Computers and Peripherals; and/or CPU Boards and Power Supplies used with Class B Personal Computers.

We: Epson America, Inc. Located at: 3840 Kilroy Airport Way, MS: 3-13, Long Beach, CA 90806 Telephone: (562) 981-3840

Declare under sole responsibility that the product identified herein, complies with 47CFR Part 2 and 15 of the FCC rules as a Class B digital device. Each product marketed, is identical to the representative unit tested and found to be compliant with the standards. Records maintained continue to reflect the equipment being produced can be expected to be within the variation accepted, due to quantity production and testing on a statistical basis as required by 47CFR 2.909. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Trade Name: Epson Type of Product: LCD Projector Model: H879A Marketing Name: Home Cinema LS100

Epson America, Inc. Limited Warranty Two-Year Projector Limited Warranty

1. What Is Covered: Epson America, Inc. (Epson) warrants to the original retail purchaser of the Epson projector product enclosed with this limited warranty statement that the product, if purchased new and operated in the United States, Canada, or Puerto Rico will be free from defects in workmanship and materials for a period of two years from the date of original purchase. For warranty service, you may be required to provide proof of the date of original purchaseited warranty applies only to the projector and not to the projector lamp, which carries a limited warranty period of ninety days from the date of original purchase. For warranty service, you may be required to provide proof of the date of original purchase.

2. What Epson Will Do To Correct Problems: If your product requires service during the limited warranty period, please call Epson at the number on the bottom of this statement and be prepared to provide the model, serial number, and, if required, date of original purchase. If Epson confirms that warranty service is required, Epson will, at its option, repair or replace the defective unit, without charge for parts or labor. If Epson authorizes an exchange for the defective unit, Epson will ship a replacement product to you, freight prepaid, so long as you use an address in the United States, Canada, or Puerto Rico. You are responsible for securely packaging the defective unit and returning it to Epson within five working days of receipt of the replacement. Epson requires a debit or a credit card number to secure the cost of the replacement product in the event that you fail to return the defective one. If Epson authorizes repair instead of exchange, Epson will direct you to send your product to Epson or its authorized service center, where the product will be repaired and sent back to you. You are responsible for packing the product and for all postage or shipping costs to and from the Epson authorized service center. When warranty service involves the exchange of the product or of a part, the item replaced becomes Epson property. The exchanged product or part may be new or refurbished to the Epson standard of quality. If service cannot be provided on the product for any reason and Epson no longer sells the same model, Epson will replace your product with a model of equal or superior value. Replacement products or parts assume the remaining warranty period of the original product.

3. What This Warranty Does Not Cover: This warranty covers only normal use in the United States, Canada, or Puerto Rico.

This warranty does not cover the following:

A. Excessive continual use

B. Consumables such as filters

C. Installation or removal

D. Cosmetic damage caused by handling or normal wear and tear during usage

E. Damage caused by failure to properly maintain the projector (see your online Users Guide for details)

F. Damage caused by interaction with non-Epson products, such as add-in cards or cables

G. Any problem resulting from misuse, abuse, improper installation, neglect, improper shipping, disasters such as fire, flood, and lightning, improper electrical current, software problems, exposure to chemical smoke, or excessive humidity

H. Any problem resulting from service by other than Epson or an Epson Authorized Servicer

Epson is not responsible for warranty service should the Epson label or logo or the rating label or serial number be removed. This warranty is not transferrable. Epson is not responsible for your data or applications, which cannot be restored and should be backed up by you. Postage, insurance, or shipping costs incurred in presenting your Epson product for carry-in warranty service are your responsibility. If a claimed defect cannot be identified or reproduced in service, you will be held responsible for costs incurred.

4. DISCLAIMER OF OTHER WARRANTIES AND REMEDIES: THE WARRANTY AND REMEDY PROVIDED ABOVE ARE EXCLUSIVE AND IN LIEU OF ALL OTHER EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. SOME LAWS DO NOT ALLOW THE EXCLUSION OF IMPLIED WARRANTIES. IF THESE LAWS APPLY, THEN ALL EXPRESS AND IMPLIED WARRANTIES ARE LIMITED TO THE WARRANTY PERIOD IDENTIFIED ABOVE. EPSONS SOLE AND EXCLUSIVE LIABILITY AND YOUR EXCLUSIVE REMEDY FOR BREACH OF WARRANTY SHALL BE LIMITED TO EITHER, AT EPSONS OPTION, REPAIR OR REPLACEMENT AS SET FORTH ABOVE.UNLESS STATED HEREIN, ANY STATEMENTS OR REPRESENTATION MADE BY ANY OTHER PERSON OR FIRM ARE VOID.

Page 4