Yamaha Clavinova CLP-175 Installation Guide

To connect headphones to your Yamaha Clavinova CLP-175, locate the headphone jack on the left underside of the keyboard. Plug in your headphones to the jack, and the internal speakers will mute automatically, allowing you to play quietly.
If the keys are not responding, first check if the piano is properly plugged in and turned on. Ensure that the local control is enabled. If the problem persists, try resetting the piano by turning it off and on again. If the issue continues, consult a professional technician.
To perform a factory reset on the Yamaha CLP-175, turn off the piano. While holding down the highest white key, turn the power back on. Continue holding the key until the instrument completes the reset process.
To change the touch sensitivity on your CLP-175, press the "Function" button until you reach the "Touch Sensitivity" setting. Use the "+" and "-" buttons to select the desired sensitivity level: hard, medium, or soft.
Regularly wipe the surface of the CLP-175 with a soft, dry cloth to remove dust. Avoid using chemical cleaners. Ensure the instrument is in a stable environment away from extreme temperatures and humidity. Periodically check cables and connections for wear.
Yes, the Yamaha CLP-175 has a built-in recording feature. Press the "Record" button to begin recording. Use the "Play" button to listen to your recorded performance. Refer to the manual for detailed instructions on editing and saving recordings.
To connect your CLP-175 to a computer, use a MIDI interface or a USB-MIDI adapter. Connect the MIDI OUT and IN ports of the piano to the corresponding ports on the interface or adapter, then connect it to your computer. Install necessary drivers and configure your DAW to recognize the device.
If the sound is distorted, check the volume levels and reduce them if they are too high. Ensure that there are no objects on or near the speakers. If using external speakers, check all connections. If distortion persists, consult the user manual or contact a technician.
To transpose the keyboard, press the "Function" button until you reach the "Transpose" setting. Use the "+" and "-" buttons to adjust the pitch up or down in semitone steps.
Use a soft, damp cloth to gently clean the keys of the CLP-175. Avoid using excessive water or cleaning agents. For stubborn stains, use a mild soap solution and ensure the cloth is not too wet. Dry the keys immediately after cleaning.