Whirlpool WRF757SDHZ Dispensing Guide
![Whirlpool WRF757SDHZ Refrigerator manual cover](/images/tUyiuwJGNnCeyOyYfvmkXtpa/thumbs/thumb175x175.webp)
To reset the water filter indicator, press and hold the "Filter" button for 3 seconds until the indicator light turns off.
The buzzing noise could be due to the compressor or the evaporator fan motor. Ensure the refrigerator is level and check if it's packed too tightly.
First, check that the vents are not blocked. Clean the condenser coils and ensure the doors seal properly. If the issue persists, contact customer service.
Unplug the refrigerator, locate the coils on the back or bottom, and use a vacuum cleaner with a brush attachment to remove dust and debris.
Locate the filter compartment inside the fridge, turn the filter counterclockwise to remove it, and insert the new filter by turning it clockwise.
The recommended temperature setting for the refrigerator is 37°F (3°C) and 0°F (-18°C) for the freezer.
Water pooling can result from a clogged defrost drain. Clean the drain using a mixture of warm water and baking soda to clear any blockages.
Ensure the ice maker is connected to the water supply, and then turn it on by pressing the ice maker switch to the 'On' position.
Check the light bulb for any visible damage and replace it if necessary. Also, ensure the refrigerator is properly plugged in and the circuit is not tripped.
It is recommended to clean the interior of your refrigerator every 3 to 4 months and the exterior and handles more frequently.