Whirlpool WSR57R18DM Energy Guide
![Whirlpool WSR57R18DM Refrigerator manual cover](/images/hrQxdvXhCkdVIomcYjqieEsT/thumbs/thumb175x175.webp)
To reset the water filter indicator light, press and hold the "Filter Reset" button for 3 seconds until the light turns off. This indicates that the filter status has been reset.
First, ensure that the refrigerator is plugged in and the circuit breaker is not tripped. Check the temperature settings and make sure the vents inside the refrigerator are not blocked. Clean the condenser coils if they are dirty. If the issue persists, contact a professional technician.
It is recommended to clean the condenser coils every 6 months to ensure optimal performance. If you have pets, consider cleaning them more frequently.
Unusual noises can be caused by several factors, such as the refrigerator being unlevel, items inside vibrating, or the compressor. Check to ensure the refrigerator is on a level surface and that items inside are not causing vibrations. If the noise continues, consult the user manual or a technician.
To change the light bulb, unplug the refrigerator, remove the light cover by turning it counter-clockwise, replace the bulb with a new one of the same type and wattage, and then reattach the cover.
The ideal temperature setting for the refrigerator compartment is between 37°F (3°C) and 40°F (4°C) and for the freezer compartment is 0°F (-18°C). Adjust settings as needed for specific storage needs.
Ensure the freezer door seals are clean and sealing properly. Avoid leaving the door open for extended periods, and do not overfill the freezer, which can restrict air circulation.
Check to ensure the ice maker is turned on and the water supply line is connected and not kinked. Also, check the water filter to ensure it is not clogged. If the problem persists, consider contacting a technician.
To defrost the freezer, remove all items, unplug the refrigerator, and leave the freezer door open to allow ice to melt. Use towels to absorb water and clean the interior before plugging the unit back in.
Yes, the door shelves can be adjusted by lifting them slightly and pulling them out. Reposition them at the desired height and push them back into the door.