Whirlpool WRF555SDHV Dispensing Guide
![Whirlpool WRF555SDHV Refrigerator manual cover](/images/GMzRiIAgPlHwtkLaUSspuQDG/thumbs/thumb175x175.webp)
To reset the water filter light, press and hold the "Filter Reset" button for 3 seconds until it turns off.
Ensure that the temperature settings are correct, the vents are unobstructed, and the door seals are clean and sealing properly. If the issue persists, it may require professional service.
It is recommended to clean the condenser coils every 6 to 12 months to ensure optimal performance.
Unusual noises can be caused by items inside the fridge vibrating or the fridge being unlevel. Ensure that the fridge is level and that items inside are not touching each other or the walls.
Locate the water filter in the upper right-hand corner or the base grille, press the eject button or twist the filter to remove it, and then insert the new filter by pressing or twisting it into place.
Check if the ice maker is turned on, ensure the water supply is connected, and check if the ice bin is full. If the problem persists, the ice maker might need servicing.
The Whirlpool WRF555SDHV is equipped with an automatic defrost feature, which should eliminate the need for manual defrosting. If frost buildup occurs, check for door seal issues or consult a technician.
The ideal temperature setting for the refrigerator is 37°F (3°C) and for the freezer is 0°F (-18°C).
Ensure the refrigerator is not placed near heat sources, keep the door seals clean and intact, and avoid keeping the refrigerator door open for extended periods.
Check if the light bulb needs replacing or if the door switch is malfunctioning. Replace the bulb or consult a technician if needed.