VTech CS5129-2 User's Manual
![VTech CS5129-2 manual cover](/images/zXSKFNZMhMgCrImHbjitQSdT/thumbs/thumb175x175.webp)
To set the date and time, press MENU, select "SET DATE/TIME" using the arrow keys, then enter the date and time using the keypad. Press SELECT to confirm.
Ensure the handset is charged, the telephone line is securely connected, and the base unit has power. If the problem persists, try resetting the phone by disconnecting the power adapter and phone line for a few minutes.
Place the handset in the base unit. The handset will automatically register within a minute. If not, press and hold the FIND HANDSET button on the base for four seconds, then follow the prompts on the handset.
Press the MENU button, navigate to "VOICEMAIL" using the arrow keys, and press SELECT. Follow the voice prompts to listen to your messages.
First, ensure the battery is properly installed. If the problem persists, replace the battery with a new one. If the issue continues, check if the charging contacts are clean and unobstructed.
Yes, you can block calls by pressing MENU, selecting "CALL BLOCK", then "BLOCK LIST". Enter the number you wish to block and press SELECT to save.
To adjust the ringer volume, press MENU, navigate to "RINGER VOLUME", and use the arrow keys to increase or decrease the volume. Press SELECT to save your preference.
Move closer to the base unit to regain connection. If the problem continues, check for any physical obstructions or electronic interference between the handset and the base.
To reset, remove the battery from the handset and disconnect the base power supply. Wait for about 1 minute, then reconnect the power and reinsert the battery.
Press the INTERCOM button, select the handset to call using the arrow keys, and press SELECT. The selected handset will ring for an intercom call.