Uniden UBC355XLT Owner's Manual

Pages 68

Year 2010

Language(s)

of 68

Uniden UBC355XLT Scanner Specification

The Uniden UBC355XLT Scanner is a versatile and user-friendly device designed for monitoring a wide range of communication frequencies. It offers a robust frequency range covering the VHF low, VHF high, and UHF bands, making it suitable for listening to public safety, marine, air, amateur radio, and other communication services. The scanner includes 300 programmable channels, allowing users to store and quickly access their favorite frequencies. Its close call RF capture technology enables the device to automatically detect and tune to nearby transmissions, ensuring you don’t miss important local communications.

The UBC355XLT features a backlit display, enhancing usability in low-light conditions, and its sleek, compact design makes it a practical addition to any setup, whether at home or on the go. The scanner supports AM/FM modes and offers search functions that help users quickly identify active frequencies within specified bands. Additionally, the UBC355XLT comes with pre-programmed service searches, which provide quick access to frequencies used by various services such as police, fire, and emergency medical services.

Power options include an AC adapter for stationary use and a DC power cable for mobile applications, ensuring flexibility in various environments. The scanner is equipped with a built-in speaker and a headphone jack, offering both personal and shared listening experiences. With its intuitive interface and reliable performance, the Uniden UBC355XLT Scanner is designed to meet the needs of hobbyists and professionals alike, providing a comprehensive tool for staying connected to the communications that matter most.

Uniden UBC355XLT Scanner F.A.Q.

How do I program frequencies into the Uniden UBC355XLT scanner?

To program frequencies into the UBC355XLT, press the 'Hold' button to stop scanning. Use the numeric keypad to enter the desired frequency and then press 'E' to store it.

Why is my Uniden UBC355XLT not picking up any signals?

Ensure that the antenna is properly connected. Check if the scanner is in the correct mode for the frequencies you want to monitor. Also, verify that the squelch setting is adjusted properly.

What is the best way to clean and maintain my Uniden UBC355XLT scanner?

Keep the scanner free from dust by wiping it with a soft, dry cloth. Avoid using chemicals or cleaning agents. Ensure that the antenna connection is clean and free from corrosion.

How can I improve the reception on my UBC355XLT?

To improve reception, use an external antenna or place the scanner near a window. Make sure the antenna is fully extended and try to avoid obstructions like metal surfaces.

What should I do if my scanner's display is not working?

Check the scanner's power source and ensure it is properly connected. If using batteries, make sure they are charged. If the issue persists, reset the scanner by turning it off and on again.

How do I reset my Uniden UBC355XLT scanner?

To reset the scanner, turn it off, then press and hold the '2', '9', and 'Hold' buttons while turning it back on. This will reset the scanner to factory settings.

Can I scan for new frequencies automatically on the UBC355XLT?

Yes, press the 'Scan' button to begin scanning for active frequencies. The scanner will automatically stop on any active frequency it detects.

My scanner keeps stopping on a channel with no sound. What should I do?

This could be caused by interference or a weak signal. Adjust the squelch setting to filter out unwanted noise. If the issue persists, lock out the problematic channel.

How can I tell if my UBC355XLT is scanning all programmed frequencies?

When the scanner is in scan mode, it will cycle through all programmed frequencies. You can observe the display to confirm that each frequency is being checked.

What are the common troubleshooting steps if my scanner is not functioning properly?

First, check the power supply and ensure the scanner is turned on. Verify antenna connection and adjust squelch. Perform a factory reset if needed. Consult the manual for specific error messages.