Uniden SSE 30 Owner's Manual
![Uniden SSE 30 Telephone manual cover](/images/hItoqgoKcNMgkeUidMhFptUl/thumbs/thumb175x175.webp)
To set up your Uniden SSE 30 Telephone, connect the phone line cord to your telephone wall jack and the other end to the phone's line port. Plug in the power adapter and allow the phone to charge for at least 15 hours before initial use.
Ensure that all cables are securely connected. Check if the phone line is active by testing with another phone. If the issue persists, try resetting the telephone by unplugging all connections for a few minutes before reconnecting.
To adjust the ringer volume, press the volume buttons located on the side of the handset while the phone is in standby mode. You can cycle through different volume levels or turn the ringer off.
Press the ‘Phonebook’ button, select ‘Add New Entry,’ then enter the contact's name and number using the keypad. Press the ‘Save’ button to store the contact.
To reset the phone to factory settings, go to the menu, select ‘Settings,’ then ‘Reset Settings.’ Confirm the reset when prompted. Note that this will erase all stored information.
During a call, press the ‘Speaker’ button located on the handset to activate the speakerphone. To deactivate, press the ‘Speaker’ button again.
Ensure the handset is properly seated in the charging cradle. Check that the power adapter is connected securely. If the issue continues, try replacing the rechargeable batteries with new ones.
To block calls, press the ‘Menu’ button, navigate to ‘Call Block,’ and select ‘Block List.’ Add numbers you wish to block by entering them manually or selecting from the call history.
Press and hold the ‘1’ key on the handset to access your voicemail. Follow the voice prompts to listen to messages. Ensure your voicemail service is activated by your phone service provider.
The Uniden SSE 30 cordless handset typically has a range of up to 300 meters outdoors and up to 50 meters indoors, depending on environmental conditions and obstacles.