Uniden MHS75 Owner's Manual
![Uniden MHS75 Radio manual cover](/images/LtWdMUkhJkiThrALIZUEQlaR/thumbs/thumb175x175.webp)
To turn on the Uniden MHS75 Radio, press and hold the power button until the LCD screen lights up.
Use the volume knob located on the top of the radio to increase or decrease the volume to your desired level.
Ensure that the battery is fully charged and properly installed. If the issue persists, try replacing the battery with a new one.
To perform a factory reset, turn off the radio, then press and hold the 16/9 and WX keys while turning the radio back on.
To maintain battery life, fully charge the battery before use, avoid overcharging, and store the radio in a cool, dry place when not in use.
Press the WX button to switch to weather mode, then use the channel buttons to navigate through available weather channels.
Check if the radio is set to the correct channel and squelch level. Ensure the antenna is properly attached and in good condition.
Wipe the radio with a soft, damp cloth. Avoid using harsh chemicals or solvents that may damage the unit.
With the desired channel selected, press and hold the MEM button until you hear a beep, indicating the channel has been stored as a favorite.
Ensure the radio is turned on and the battery is charged. If the issue continues, perform a reset and check for any physical damage to the screen.