Uniden DECT 3115 Owner's Manual

To set up the Uniden DECT 3115, connect the base unit to a power outlet and plug in the telephone line cord. Insert the batteries into the handset and place it on the base to charge for at least 15 hours before initial use.
Ensure all connections are secure. Check that the telephone line cord is properly connected to both the phone and the wall jack. If the problem persists, try connecting a different phone to the same jack to determine if the issue is with the line.
Press the voicemail button on your handset and follow the voice prompts. You may need to set up your voicemail service with your phone provider to access messages.
To adjust the ringer volume, press the volume up or down button while the phone is in standby mode. The ringer volume will be displayed on the screen, allowing you to adjust it to your preference.
Ensure that the handset is properly seated on the base or charging cradle. Check the power connection to the base and try using a different outlet. If the battery is old, consider replacing it with a new one.
Place the new handset on the base. The registration process should start automatically. If not, press the "Menu" button on the handset, navigate to "Register Handset," and follow the prompts.
To clear the caller ID list, press the "CID" button, then use the navigation keys to select "Delete All." Confirm by pressing the "Menu/OK" button.
Ensure the base is placed in a central location away from obstructions. Avoid placing it near metal objects or electronic devices that can interfere with the signal.
To reset to factory settings, navigate to the "Menu," select "System Settings," then choose "Reset Settings" and confirm. This will erase all stored information and return the phone to its default state.
Yes, you can block unwanted calls by navigating to the "Call Block" menu and adding the numbers you wish to block. Refer to the user manual for detailed instructions on blocking calls.