Sony SRS X5 Quick Start Guide

To pair your Sony SRS X5 with a Bluetooth device, turn on the speaker and press the Bluetooth button until the indicator starts flashing rapidly. On your Bluetooth device, enable Bluetooth and select 'SONY SRS-X5' from the list of available devices.
If your Sony SRS X5 is not turning on, ensure that the battery is charged. Connect the speaker to a power source using the supplied AC adapter and try turning it on again. If it still doesn't work, reset the speaker by pressing the reset button near the power input.
To reset the Sony SRS X5 to factory settings, press and hold the power button and the volume down button simultaneously for about 5 seconds until the speaker turns off. This will restore the speaker to its default factory settings.
The Sony SRS X5 offers up to 8 hours of battery life on a full charge. To maximize battery life, keep the volume at a moderate level, avoid exposure to extreme temperatures, and ensure the speaker is fully charged before use.
Yes, you can use the Sony SRS X5 while it is charging. Simply connect it to a power source using the AC adapter, and continue to use it normally.
If your Sony SRS X5 is not connecting to a Bluetooth device, ensure that the speaker is in pairing mode and that the Bluetooth function is enabled on your device. Try restarting both the speaker and the Bluetooth device, and attempt the pairing process again.
To clean your Sony SRS X5 speaker, use a soft, dry cloth to gently wipe the exterior. Avoid using any harsh chemicals or abrasive materials that could damage the surface. Ensure the speaker is powered off and disconnected from any power source before cleaning.
No, the Sony SRS X5 is not water-resistant. It is recommended to keep the speaker away from water and other liquids to prevent damage.
To improve the sound quality of your Sony SRS X5, ensure the speaker is placed on a stable surface, away from obstructions. Adjust the equalizer settings on your connected device if available, and avoid covering the speaker's drivers.
The Sony SRS X5 can pair with multiple devices, but it can only connect to one device at a time. To switch between devices, disconnect the current device and connect the new one.