Samsung WF203ANW User Manual
![Samsung WF203ANW Washing Machine manual cover](/images/VdnlrmxZeftNteBssmKYnJeF/thumbs/thumb175x175.webp)
To perform a self-clean cycle, ensure the drum is empty, then select the ‘Self Clean’ option on the control panel and press Start. This cycle helps to clean the drum and remove residue.
Check if the drain hose is kinked or clogged, and ensure the drain filter is clean. Inspect the pump for blockages and clean it if necessary.
Ensure the washing machine is level and all four feet are firmly on the ground. Avoid overloading the washer, and balance the load by redistributing the clothes evenly.
Ensure the door is closed properly and check the power supply. Confirm that the water supply valves are open and that there are no error codes displayed on the control panel.
Loud noises can be due to an unbalanced load, items caught in the drum, or worn bearings. Inspect the drum for foreign objects and redistribute the load if necessary.
Clean the detergent drawer every few months or whenever you notice buildup. Remove the drawer, rinse it under warm water, and use a soft brush to remove residue.
The ‘nd’ error code indicates a draining issue. Check the drain hose for blockages, clean the pump filter, and ensure the drain pump is functioning correctly.
Leave the door slightly open after each wash to allow moisture to escape. Regularly run a self-clean cycle and wipe the door gasket to prevent mold buildup.
Regularly clean the drum, detergent drawer, and filter. Ensure the machine is level, and periodically run a self-clean cycle. Check hoses for wear and replace them if necessary.
The ‘Sud’ error indicates excessive suds. Use the correct detergent and quantity, and run a rinse cycle to remove the excess suds. If the problem persists, clean the machine's drain pump filter.