Samsung WA45H7000AW User Manual
![Samsung WA45H7000AW Washing Machine manual cover](/images/ejJyDMvpgFOsomDKyoLHvqLy/thumbs/thumb175x175.webp)
To perform a self-clean cycle, press the Power button, then press the Self Clean button. The cycle will automatically start, and it is recommended to run it every 20 washes.
First, check for any blockages in the drain hose and ensure it is not kinked. Also, clean the pump filter and make sure the drain hose is installed correctly.
Ensure the washing machine is level by adjusting the feet. Also, check that the load is balanced and not too large. Distribute clothes evenly in the drum.
To reset the washing machine, unplug it from the power outlet, wait for 1-2 minutes, and then plug it back in. This can resolve minor electronic glitches.
Remove the detergent drawer by pulling it out until it stops, then press the release lever. Wash it under warm water to remove any detergent residue and mold.
Regular maintenance includes cleaning the drum, checking the hoses for leaks or cracks, cleaning the detergent drawer, and running a self-clean cycle every 20 washes.
Check if the door is closed properly, ensure the machine is plugged in, and verify that the circuit breaker has not tripped. Also, make sure the water supply is turned on.
Ensure the washing machine is level and on a firm surface. Avoid overloading the drum, and make sure the machine is not in contact with walls or other appliances.
The 'nd' error code indicates a no-drain condition. Check for clogs in the drain pump, hose, and ensure the drain hose is positioned correctly.
The machine automatically adjusts the water level based on the load size. Ensure the load is distributed evenly for the best results.