Samsung StormWash DW80K7050 User Manual
![Samsung StormWash DW80K7050 Dishwasher manual cover](/images/oLXJslYvBqTBaGeKDMrZZXiK/thumbs/thumb175x175.webp)
Ensure that large items like pots and pans do not block the spray arms. Place dishes so that the soiled surfaces face the center and the detergent dispenser is not blocked. Use the adjustable rack to accommodate taller items.
Check for clogs in the drain hose and the sink drain. Ensure the filter is clean and free of debris. If the problem persists, inspect the drain pump for any blockages.
Refer to the user manual for specific error code meanings. Common solutions include checking for water supply issues, ensuring the door is properly latched, and resetting the dishwasher by turning off the power for a few minutes.
Regularly clean the filter and spray arms to prevent clogs. Wipe down the door seals and check for any leaks. Run a cleaning cycle with a dishwasher cleaner monthly to maintain performance.
Ensure that the water temperature is at least 120°F. Check that the spray arms are not clogged and the detergent dispenser is working. Avoid overloading the dishwasher and use the appropriate wash cycle.
Inspect for any obstructions around the door or racks. Check if the door latch is functioning properly and adjust the leveling of the dishwasher. Clean the door gasket to ensure a proper seal.
Place heavily soiled items in the lower rack above the StormWash wheel. Ensure the items do not block the rotating arm. Select the StormWash cycle to activate deeper cleaning for tough stains.
Ensure that dishes are properly loaded and not touching each other or the spray arms. Check for any loose items or utensils that might have fallen into the bottom of the dishwasher.
Use a rinse aid to help water sheet off dishes. Ensure the water softener is set correctly if you have hard water. Adjust the amount of detergent used based on water hardness.
To reset the dishwasher, turn off the power at the circuit breaker or unplug it for about 1-5 minutes. After restoring power, the dishwasher should be reset and ready for use.