Samsung RQ48T943T1 User Manual
![Samsung RQ48T943T1 Refrigerator manual cover](/images/YJcOUcSmSPUAlupxeuhVehEe/thumbs/thumb175x175.webp)
To adjust the temperature settings, open the refrigerator door and locate the control panel. Press the 'Fridge' or 'Freezer' button to select the desired temperature. Use the '+' and '-' buttons to adjust the temperature accordingly.
Unusual noises can be caused by a variety of factors. Ensure that the refrigerator is level and that nothing inside is vibrating against the walls. Also, check if the fan is obstructed. If the noise persists, consult the user manual or contact Samsung support.
Press and hold the 'Power Cool' and 'Power Freeze' buttons simultaneously for a few seconds to initiate self-diagnosis mode. The display will show error codes if there are any issues. Refer to the user manual for more details on error codes.
Regularly clean the condenser coils, check door seals for leaks, and ensure proper airflow around the refrigerator. Additionally, defrost the freezer if ice buildup occurs and replace the water filter every six months.
After replacing the water filter, press and hold the 'Filter Reset' button on the control panel for 3 seconds until the indicator light turns off. This will reset the filter status.
Check if the temperature settings are correct and ensure that the doors are sealing properly. Make sure the vents inside are not blocked. If the issue persists, unplug the refrigerator for a few minutes and plug it back in.
To replace the light bulb, unplug the refrigerator and locate the light cover inside. Unscrew or unclip the cover, remove the old bulb, and replace it with a new one of the same type and wattage. Reattach the cover and plug the refrigerator back in.
The Samsung RQ48T943T1 model typically does not support reversible door swing. Check the user manual or contact Samsung support for model-specific information regarding door adjustments.
To clean the water dispenser, turn off the water supply and remove the tray. Clean the tray and nozzle with a mild detergent and warm water. Rinse thoroughly and reassemble the parts before turning the water supply back on.
Condensation can occur if the doors are frequently opened or not closed properly. Ensure the door seals are intact and not damaged. Also, check the humidity settings and adjust them if necessary.