Samsung RFG299AARS User Manual
![Samsung RFG299AARS Refrigerator manual cover](/images/iZOHMFARJmwnZCTGzPvEaiKB/thumbs/thumb175x175.webp)
To reset the water filter indicator, press and hold the "Alarm / Hold 3 sec for Filter Reset" button for 3 seconds. The indicator light will turn off, confirming the reset.
Check if the refrigerator is plugged in and the power is on. Ensure the temperature settings are correct and the vents inside the fridge are not blocked. If the issue persists, consider cleaning the condenser coils or contacting a professional technician.
To change the temperature settings, press the "Fridge" or "Freezer" button on the control panel. Each press will adjust the temperature by 1 degree. Monitor the display for the current temperature setting.
Water pooling can be caused by a blocked defrost drain. Try clearing the drain with warm water or a pipe cleaner. If the problem continues, it may require professional inspection to address clogged or frozen components.
It is recommended to replace the water filter every 6 months to ensure optimal water quality and flow. Regular replacement helps maintain the performance of the refrigerator's water and ice dispenser.
The Samsung RFG299AARS refrigerator uses the Samsung DA29-00020B HAF-CIN water filter. Ensure compatibility when purchasing replacement filters.
First, ensure the ice maker is turned on and the water supply line is not kinked. Check the ice maker compartment for any jams or ice blockages. If problems persist, consider resetting the ice maker by turning it off and on again.
First, unplug the refrigerator. Locate the condenser coils, usually at the back or bottom of the unit. Use a vacuum cleaner with a brush attachment to remove dust and debris. Reconnect the power once cleaning is complete.
Check if the refrigerator is properly plugged in and receiving power. If the display is still not working, try resetting the unit by unplugging it for a few minutes and then plugging it back in. If the issue persists, there might be an internal fault requiring professional repair.
To enable the child lock feature, press and hold the "Child Lock" button for 3 seconds. This will lock the control panel to prevent accidental changes. To deactivate, press and hold the button again for 3 seconds.