Samsung Pure Cycle WA476DSHASU User Manual
![Samsung Pure Cycle WA476DSHASU Washing Machine manual cover](/images/IbZhyUZTPSDxGiBVCkFDVGIC/thumbs/thumb175x175.webp)
To perform a self-clean cycle, ensure the washing machine is empty. Press the Power button, then press the Self Clean button. The cycle will start automatically and take approximately 4 hours.
Check the drain hose for kinks or clogs, and make sure it is positioned correctly. Clean the debris filter located at the bottom of the machine. If the issue persists, contact a service technician.
Ensure that the washing machine is level by adjusting the leveling feet. Avoid overloading the machine and distribute laundry evenly inside the drum.
Check that the door is closed properly and that the power cord is securely plugged in. Verify that the water supply is turned on and that the control panel is not locked.
Regularly clean the detergent drawer and the drum. Perform a Self Clean cycle every 20 washes. Check and clean the debris filter every 2 months.
Refer to the user manual for specific error codes. Common solutions include checking water supply, ensuring the door is closed, and resetting the machine by unplugging it for a few minutes.
Yes, you can use bleach. Add it to the bleach compartment in the detergent drawer, following the manufacturer's instructions for proper usage and quantity.
Ensure you're using high-efficiency (HE) detergent and not exceeding the recommended amount. Run a rinse cycle to clear excess suds.
Remove the detergent drawer by pulling it out and pressing the release lever. Rinse it under warm water, using a soft brush to remove any residue. Allow it to dry before reinserting.
Foul odors can result from detergent buildup and mold. Run a Self Clean cycle with a washing machine cleaner. Keep the door open between washes to allow air circulation.