Samsung NX58K7850 User Manual

To set the clock, press the 'Clock' button on the control panel, then use the number pad to enter the current time. Press 'Start' to confirm.
First, ensure the oven is properly plugged in and that the circuit breaker has not tripped. Check if the oven settings are correct. If the problem persists, contact Samsung customer service for further assistance.
Remove the grates and soak them in warm soapy water. Use a non-abrasive scrubber to remove any residue. Rinse and dry thoroughly before placing them back on the stove.
Yes, to activate the child lock, press and hold the 'Start' button for three seconds. This will lock the oven controls to prevent accidental use.
Remove all racks and accessories from the oven. Close the door and select the 'Self Clean' option. Choose the cleaning duration and press 'Start' to begin the cycle.
Check for obstructions around the door seal. If the door still doesn't close, make sure the hinges are not damaged or misaligned. Contact a technician if necessary.
First, disconnect the power. Remove the glass cover by turning it counterclockwise. Replace the bulb with a new one of the same type, then reattach the cover and restore power.
A clicking noise is typically normal and caused by the ignition system or the cooling fan. If the noise becomes loud or irregular, check if the oven is level or contact a technician.
Press 'Bake' and set the temperature to 350°F. Press 'Start' and then 'Bake' again to display the current calibration. Use the arrow keys to adjust the temperature as needed.
Regularly clean the oven interior and exterior surfaces, including the control panel and knobs. Check and clean the burners and grates monthly. Inspect the door seal for wear and replace if necessary.