Samsung NV51M9770D User Manual
![Samsung NV51M9770D Oven manual cover](/images/pZeIKaEokGpiOpuKNcQnhMuQ/thumbs/thumb175x175.webp)
To set the oven to convection mode, press the "Convection" button on the control panel. Then, use the number pad to enter your desired temperature and press "Start" to begin preheating.
First, ensure that the oven is correctly plugged in and the circuit breaker is not tripped. Check if the oven controls are set correctly. If the problem persists, consider contacting Samsung customer support for further assistance.
Use a soft cloth and a mild detergent to clean the interior. Avoid using abrasive cleaners or scouring pads. For tough stains, a paste of baking soda and water can be applied and left to sit before wiping away.
The clicking noise is typically normal and indicates the oven's relays are switching. If the noise is unusually loud or accompanied by other issues, it might be worth checking with a technician.
To replace the oven light bulb, ensure the oven is turned off and cool. Remove the bulb cover by turning it counterclockwise, then replace the old bulb with a new 40-watt appliance bulb. Replace the cover and turn it clockwise to secure it.
Remove all racks and accessories from the oven. Close the door and select the "Self Clean" function. Choose the desired cleaning time and start the cycle. Allow the oven to cool before wiping any remaining ash with a damp cloth.
Refer to the user manual for specific error codes and their meanings. Common solutions include resetting the oven by turning it off at the circuit breaker or checking for any loose connections. If unresolved, contact Samsung support.
Yes, it is normal for the oven door to feel warm during use, especially at high temperatures. However, if it becomes excessively hot to the touch, it might be an indication of a faulty door seal, which should be inspected.
To calibrate the oven temperature, press and hold the "Bake" button for a few seconds until the display shows the calibration screen. Use the number pad to adjust the temperature up or down, then press "Start" to save the changes.
Yes, you can use aluminum foil in the oven, but avoid covering the entire oven rack to ensure proper air circulation. Do not place foil on the oven floor as it can cause heat damage.