Samsung NK36R9600CM User Manual
![Samsung NK36R9600CM Hood manual cover](/images/sIqprGuzcLSEGinvVdsCyDuW/thumbs/thumb175x175.webp)
To clean the filters, first remove them by pulling the handles. Wash them in warm, soapy water or use a dishwasher. Ensure they are completely dry before reinstalling.
Check that the hood is properly plugged in and that the circuit breaker has not tripped. If the issue persists, contact Samsung support for further assistance.
The charcoal filter should be replaced every 6 to 12 months, depending on usage frequency.
Yes, the LED lights can be replaced. Consult the user manual for the correct type and replacement procedure. If unsure, contact a professional technician.
Unusual noises may be caused by loose parts or debris in the fan. Ensure all parts are securely fastened and check for any obstructions.
Make sure the filters are clean and the ductwork is not obstructed. Increase the fan speed using the control panel to enhance suction power.
The recommended distance is typically between 24 to 30 inches from the cooking surface to the underside of the hood. Consult the user manual for specific installation guidelines.
Press and hold the filter button on the control panel for a few seconds until the indicator light resets.
Ensure the filters are clean and the duct system is not blocked. Verify that the hood is set to the appropriate speed for your cooking method.
Yes, the Samsung NK36R9600CM hood can be used in recirculation mode with the installation of a charcoal filter. Refer to the manual for setup instructions.