Samsung FlexZone RT18M User Manual

To adjust the temperature, press the 'Fridge' or 'Freezer' button on the control panel until you reach the desired temperature setting. The FlexZone compartment can be adjusted by selecting the desired mode: Fridge, Chill, Soft Freeze, or Freeze.
First, check if the refrigerator is plugged in and the breaker is not tripped. Ensure the doors are sealed properly and not left open. Check for any obstructions in the air vents and clean the condenser coils at the back of the refrigerator if necessary.
It is recommended to clean the condenser coils every six months to ensure optimal performance and efficiency. Dust and debris can accumulate, reducing cooling efficiency.
The FlexZone feature allows you to customize the temperature of a compartment for specific needs. You can choose settings such as Fridge, Chill, Soft Freeze, or Freeze to accommodate different types of food storage requirements.
Ensure the refrigerator is placed in a well-ventilated area away from heat sources. Keep the doors closed as much as possible, and do not overfill the compartments to maintain proper air circulation.
Check if the drain hole at the back of the refrigerator is clogged and clean it if necessary. Ensure the doors are closing properly and the seals are intact. Also, examine if the water filter is properly installed and not leaking.
To replace the water filter, locate it inside the refrigerator. Turn the filter counterclockwise to remove it. Insert the new filter and turn it clockwise until it locks into place. Run water through the dispenser to clear any air or impurities.
The recommended temperature setting for the refrigerator is 37°F (3°C) and for the freezer is 0°F (-18°C). Adjust these settings based on your specific storage needs.
Ensure the ice maker is turned on and the water supply line is connected and not frozen. Check if the freezer is at the correct temperature. If necessary, reset the ice maker by turning it off and on again.
Press and hold the 'Fridge' and 'Freezer' buttons simultaneously for a few seconds until the display panel lights up. Any error codes will appear on the display, which can then be checked in your user manual for troubleshooting steps.