Samsung FE-R300SW User Manual
![Samsung FE-R300SW Cooker manual cover](/images/xeEezxkQvFwbtbyoIfWueKir/thumbs/thumb175x175.webp)
Press the 'Clock' button, then use the '+' and '-' buttons to set the correct time. Press 'Clock' again to confirm.
First, ensure that the oven is set to the correct temperature and mode. Check that the door is properly closed. If the issue persists, inspect the heating element for damage or contact a technician.
Allow the cooktop to cool completely, then use a soft cloth and a cooktop cleaner to remove spills. Avoid abrasive materials that could scratch the surface.
Yes, you can use aluminum foil, but do not cover the oven's bottom as it can affect heat distribution and cause damage.
Check if the bulb is burned out and replace it if necessary. Ensure the oven is not in the 'Self-Clean' mode, which automatically turns off the light.
Remove all racks and accessories from the oven. Press 'Self Clean', select the desired cleaning time, and press 'Start'. Ensure good ventilation during the process.
Check for any error codes on the display. Reset the cooker by turning off the power for a few minutes. If the issue persists, contact customer support.
Press and hold the 'Bake' and 'Broil' buttons simultaneously for a few seconds, then adjust the temperature using the '+' or '-' buttons. Press 'Start' to save the setting.
Press and hold the 'Child Lock' button for three seconds to lock or unlock the controls. The display will indicate when the lock is active.
Use a soft, damp cloth with a mild detergent to clean the exterior. Avoid using abrasive cleaners or pads that could damage the finish.