Samsung DW80R9950UT User Manual
![Samsung DW80R9950UT Dishwasher manual cover](/images/sPpkgSvQsNjpwQCHYirBQRlj/thumbs/thumb175x175.webp)
To reset your Samsung DW80R9950UT Dishwasher, press and hold the Start button for 3 seconds until the display turns off. Release the button and wait for the dishwasher to reboot.
Check the drain hose for kinks or blockages, and ensure the sink drain is clear. Clean the filter and sump area to remove debris. If the problem persists, consult the user manual or contact Samsung support.
Remove the lower rack and locate the filter assembly at the bottom of the dishwasher. Turn the filter counterclockwise to remove it. Rinse under running water to clean away food particles and debris. Reassemble and secure the filter by turning it clockwise.
Unusual noises can be caused by items in the dishwasher rattling against each other or the spray arms. Ensure dishes are properly loaded and not obstructing the spray arms. Check for any loose items inside the dishwasher.
Press the Power button to turn on the dishwasher. Use the Cycle Selector button to choose the desired cycle. The selected cycle will light up on the control panel. Press Start to begin the cycle.
Regularly clean the filter, wipe the door seals, and check the spray arms for blockages. Run a dishwasher cleaner through an empty cycle monthly to prevent buildup. Inspect hoses and connections for leaks.
No, regular dish soap should not be used in dishwashers as it creates excessive suds that can overflow and damage the machine. Use only dishwasher-specific detergents.
Ensure the door is fully closed and latched. Check if the child lock is activated and deactivate it if necessary. Verify that the dishwasher is connected to power and that the circuit breaker is not tripped.
Open the rinse aid dispenser cap located inside the door. Turn the dial to adjust the rinse aid dosage level. Higher numbers indicate more rinse aid per cycle. Close the cap securely after adjustment.
Check door seals for damage and ensure they are clean. Verify that the dishwasher is level and not overloaded. Inspect hoses and connections for leaks. If the issue persists, contact a professional technician.