Samsung DW80F800UWS User Manual
![Samsung DW80F800UWS Dishwasher manual cover](/images/wTiHMoLwMYQjWNwMYrfewCtW/thumbs/thumb175x175.webp)
To reset your Samsung DW80F800UWS dishwasher, press and hold the "Start/Reset" button for about 3 seconds. This will cancel the current cycle and reset the dishwasher.
Check the drain hose for kinks or clogs. Ensure that the sink drain is not blocked. Clean the dishwasher filter and remove any debris that might obstruct the drain pump.
Remove the lower rack and locate the filter at the bottom of the dishwasher. Turn the filter counterclockwise to remove it. Rinse it under running water to remove any debris, then replace it by turning it clockwise.
Unusual noises can be caused by items in the dishwasher rattling against each other. Ensure dishes are properly loaded and not touching. Check for any foreign objects in the spray arms or filter area.
Use high-quality automatic dishwasher detergents that are specifically formulated for dishwashers. Avoid using regular dish soap, as it can cause excessive suds.
Ensure the door is fully closed and latched. Check if the dishwasher is properly plugged in and the circuit breaker is not tripped. Verify that the "Child Lock" feature is not enabled.
Clean the spray arms every few months or if you notice decreased cleaning performance. Remove them and rinse under running water, using a toothpick to clear any blocked spray holes.
The 'Heavy' cycle is designed for heavily soiled dishes and cookware. It uses higher water temperature and longer wash times to ensure thorough cleaning.
Yes, using rinse aid helps improve drying and reduces water spots. Fill the rinse aid dispenser located on the inside of the door with the recommended amount.
Error code OE indicates a drainage issue. Check the drain hose for obstructions, ensure the sink drain is clear, and clean the filter. If the issue persists, inspect the drain pump.