Samsung DVE55M9600 User Manual
![Samsung DVE55M9600 Dryer manual cover](/images/iJwPnxYCBrHaWiIgRXKTLjmo/thumbs/thumb175x175.webp)
To clean the lint filter, open the dryer door and pull the lint filter upward to remove it. Use your fingers to roll the lint off the screen. Rinse the filter under warm water if needed, dry it thoroughly before reinserting it into the dryer.
First, check if the dryer is plugged in and the circuit breaker is not tripped. Ensure that the laundry load is not too large, as this can affect heating. If the issue persists, inspect the thermal fuse and heating element for continuity, and replace them if necessary.
To prevent wrinkles, promptly remove clothes from the dryer when the cycle ends. You can also use the Wrinkle Prevent feature, which intermittently tumbles clothes for up to 180 minutes after the cycle ends.
Check if the lint filter and exhaust vent are clean, as blockages can reduce airflow. Ensure the dryer is not overloaded and that the selected cycle matches the fabric type. If issues continue, the moisture sensor may need cleaning or service.
To use Smart Care, download the Samsung Smart Washer/Dryer app on your smartphone. Open the app and follow the on-screen instructions to scan the dryer's display. The app will provide troubleshooting steps based on the error code detected.
Regular maintenance includes cleaning the lint filter after each use, checking the exhaust vent for blockages monthly, and wiping the dryer's exterior with a damp cloth. Annually, inspect the dryer drum and belt for wear.
To adjust the drying time, select a Manual Dry cycle. Use the Time Adjust button to increase or decrease the drying time based on your needs. Confirm your selection by pressing Start.
Loud noises may be due to loose objects in the drum or worn-out drum rollers or bearings. Check for loose items, and if the noise persists, inspect and replace any worn parts.
Yes, the Samsung DVE55M9600 Dryer can be stacked with a compatible Samsung washer using a stacking kit. Ensure both appliances are level and stable before stacking.
To reset the dryer, unplug it from the power source or turn off the circuit breaker for 1-3 minutes. Then, restore power to the dryer. This can help clear any temporary errors.