Samsung DVD-V3500 User Manual

To connect your Samsung DVD-V3500 to your TV, use an RCA cable. Connect the yellow plug to the video input on your TV and the red and white plugs to the audio inputs. Ensure your TV is set to the correct input source.
Ensure the disc is clean and free of scratches. Verify that the disc is compatible with the player. Try resetting the player by unplugging it for a few minutes. If the problem persists, the lens might need cleaning.
Use a DVD lens cleaning disc, which can be purchased from electronics stores. Insert the disc and follow the on-screen instructions. Avoid using any liquid cleaners directly on the lens.
Check if the disc is correctly placed on the tray and is the right format. If the problem continues, the eject button might be stuck or the player might need servicing.
Samsung DVD-V3500 is typically set for a specific region and cannot be changed. Ensure your discs are compatible with your player’s region code.
Check the audio connections to your TV or sound system. Ensure the audio settings on both the DVD player and TV are properly configured. Test with a different disc to rule out disc issues.
No, the Samsung DVD-V3500 does not support recording from VHS to DVD. It is designed only for playback.
Press and hold the Stop button on the front panel for about 5 seconds until you see "Reset" on the display. This will restore the default settings.
Check the batteries and replace them if necessary. Ensure there are no obstructions between the remote and the player. Try using the remote closer to the player.
Ensure the discs are clean and scratch-free. Use high-quality cables for connection. Adjust the TV settings for better picture and sound quality.