Samsung DV476GTHA User Manual
![Samsung DV476GTHA Dryer manual cover](/images/aLWxyKAWVEAYNnZdfObEVIsj/thumbs/thumb175x175.webp)
To clean the lint filter, open the dryer door and pull out the lint filter located at the bottom of the opening. Remove any accumulated lint by hand or with a soft brush, then rinse under warm water if necessary. Ensure it's completely dry before reinserting it back into the dryer.
If your dryer is not heating, check to ensure it is properly plugged in and that the circuit breaker has not tripped. Clean the lint filter and ensure the exhaust vent is not blocked. If the issue persists, it may require service to check the thermal fuse or heating element.
A squealing noise may be caused by a worn or damaged drum belt, idler pulley, or drum rollers. Inspect these components for wear and replace them if necessary. It may be advisable to contact a professional technician if you are not comfortable doing the repair yourself.
To use the steam cycle, ensure the water reservoir is filled with water. Select the desired steam cycle on the control panel and press start. The steam cycle is ideal for reducing wrinkles and refreshing clothes.
Regular maintenance includes cleaning the lint filter after every load, checking and cleaning the exhaust vent periodically, and inspecting the dryer drum and seals for wear. Additionally, ensure the dryer is level to prevent unnecessary vibrations.
To reset the dryer, unplug it from the power outlet for at least 5 minutes. After reconnecting the power, the dryer should be reset. If the issue persists, consult the user manual or contact customer support.
If the drying cycle is taking longer, check the lint filter and exhaust vent for blockages. Ensure that the dryer is not overloaded, as this can affect drying efficiency. If the problem continues, it might be due to a faulty sensor or heating element.
The "HE" error code indicates a heating error. This could be due to a faulty heating element, thermal fuse, or thermostat. Check these components, and if needed, seek professional repair services.
To replace the drum light, unplug the dryer and open the door. Locate the light cover on the inside upper panel. Remove the cover, replace the bulb with a new one, and reattach the cover. Ensure the new bulb is the same type and wattage as the original.
Yes, the Samsung DV476GTHA Dryer can be stacked with a compatible Samsung washer using a stacking kit. Ensure that the kit is correctly installed to prevent any accidents or damage.