Samsung DV433ETGJ User Manual
![Samsung DV433ETGJ Dryer manual cover](/images/qhRbFEFfnTPOeSkmjKKkqGDw/thumbs/thumb175x175.webp)
To clean the lint filter, open the dryer door and locate the lint filter at the bottom of the door opening. Pull the filter out, remove the lint by hand, and rinse the filter under warm water if necessary. Dry thoroughly before reinserting it into the dryer.
First, check if the dryer is connected to a power source and the circuit breaker is not tripped. Then, ensure that the lint filter and exhaust vent are clean. If the problem persists, inspect the heating element, high-limit thermostat, and thermal fuse for faults and replace them if necessary.
To reset the dryer, unplug it from the power source and wait for about 5 minutes. Reconnect the power and press the 'Power' button to turn the dryer on. This should reset the control board.
Place a level on top of the dryer. Adjust the leveling feet by turning them clockwise to raise or counterclockwise to lower the dryer until it is perfectly level. Ensure all four feet are firmly on the ground to prevent vibrations and noise.
A squeaking noise may indicate worn drum rollers or a damaged belt. Inspect these components for wear and tear, and replace them if needed. Regular maintenance, such as lubricating moving parts, can also prevent squeaking.
Refer to the user manual for detailed descriptions of each cycle. Generally, select a cycle based on the fabric type and desired dryness level. Use the 'Normal' cycle for average loads, 'Delicates' for fragile items, and 'Heavy Duty' for bulky items.
Clean the lint filter before each load, use sensor dry cycles to avoid over-drying, dry full loads without overloading, and ensure the exhaust vent is clear to improve efficiency.
The exhaust vent should be inspected and cleaned at least once a year to prevent blockages. More frequent inspections may be necessary if drying times increase or if you notice a burning smell.
Yes, the dryer can be stacked on top of a compatible Samsung washing machine using a stacking kit. Ensure the appliances are properly aligned and secured to prevent tipping or vibrations.
If the control panel is unresponsive, try resetting the dryer by unplugging it for 5 minutes. Check for any visible damage or loose connections. If the issue persists, it may require professional service to inspect the control board.