Samsung DV328A User Manual
![Samsung DV328A Dryer manual cover](/images/NdLowiDVmlLBfpxviIGDtkgm/thumbs/thumb175x175.webp)
To clean the lint filter, open the dryer door and pull out the lint filter from the bottom of the door opening. Remove any lint by hand or with a soft brush. Rinse the filter under warm water if needed, and allow it to dry completely before reinserting.
Ensure the dryer is properly plugged in and that the circuit breaker is not tripped. Check if the door is fully closed and the start button is firmly pressed. If the dryer still doesn't start, try resetting it by unplugging it for a few minutes and then plugging it back in.
Check if the dryer is set to an air fluff or no-heat cycle. Ensure the venting system is clear of obstructions. Also, inspect the thermal fuse and heating element for continuity, as they may need replacement if faulty.
Ensure the dryer is level and on a stable surface. Check for loose items inside the drum or the lint filter area. Tighten any loose screws or components on the dryer cabinet.
Regularly clean the lint filter and inspect the exhaust vent for blockages. Every few months, vacuum the lint trap housing and clean the moisture sensor inside the drum with a damp cloth.
Check the lint filter and exhaust vent for blockages. Ensure the dryer is not overloaded and that the clothes are not excessively wet. Verify that the heating element and thermostat are functioning correctly.
Yes, you can stack the dryer on top of a compatible Samsung washing machine using a stacking kit. Ensure both appliances are properly secured and leveled to prevent vibration and movement.
To use the delay start feature, load your clothes and close the door. Select the desired cycle and options, then press the Delay Start button to set the delay time. Press Start to activate the delay timer.
A burning smell may be caused by lint build-up in the exhaust vent or inside the dryer cabinet. Check for any blockages and clean the lint filter. If the smell persists, inspect the wiring and components for signs of overheating or damage.
To reset the control panel, unplug the dryer from the power outlet for a few minutes, then plug it back in. This can help resolve minor electronic glitches.