Samsung DV2C6B User Manual
![Samsung DV2C6B Dryer manual cover](/images/bGdzreFeRoXTUfBoknbhcdFM/thumbs/thumb175x175.webp)
To clean the lint filter, open the dryer door, pull out the lint filter from the bottom of the door opening, and remove any lint build-up. Rinse the filter under running water if necessary, then dry it completely before reinserting it into the dryer.
If your dryer is not heating, check if the power supply is sufficient and the circuit breaker is not tripped. Inspect the thermal fuse, heating element, and thermostat for faults. Replace any defective parts as necessary.
First, ensure the dryer is plugged in and the door is closed securely. Check the drive belt for wear and tear or breakage. If the belt is broken, it will need to be replaced. Also, inspect the drum rollers and axles for signs of wear.
To reduce wrinkles, try using the 'Wrinkle Prevent' option which intermittently tumbles clothes after the drying cycle ends. Also, promptly remove clothes from the dryer after the cycle completes.
Loud noises can be caused by objects in the drum or defective parts like the drum rollers, idler pulley, or blower wheel. Check for any foreign objects and inspect these components for damage or wear.
Ensure the dryer is properly plugged in and the circuit breaker is not tripped. Check the door switch and start switch for continuity with a multimeter. Replace any faulty switches.
Regularly clean the lint filter and exhaust duct to prevent lint build-up. Inspect the drum belt, rollers, and pulleys for wear every six months. Keep the dryer area free of dust and lint.
To reset the dryer, unplug it from the power source, wait for 1-2 minutes, and then plug it back in. This may help resolve minor operational issues.
For delicate fabrics, use the 'Delicates' cycle which uses lower heat settings to prevent damage to sensitive materials. Always refer to garment care labels for specific instructions.
Ensure the lint filter and exhaust duct are clean and not clogged. Check if the load size is too large or if the dryer is set to a low heat setting. These factors can extend drying times.