Samsung DV209A User Manual
![Samsung DV209A Dryer manual cover](/images/jebIqyfAgQPeVNkVSZIYySQC/thumbs/thumb175x175.webp)
To clean the lint filter, open the dryer door and pull out the lint filter from the bottom of the door opening. Remove any lint by hand or with a vacuum cleaner and then reinsert the filter securely back into place.
Ensure the dryer is plugged in and the circuit breaker is not tripped. Check if the door is closed properly and that the start button is firmly pressed. Also, verify that the child lock is not activated.
Check if the dryer is set to an appropriate heat cycle. Inspect the vent line for blockages and ensure the lint filter is clean. If the issue persists, it could be a faulty heating element or thermostat, which may need professional servicing.
Ensure the dryer is level on the floor and that it is not overloaded. Check for any loose items in the drum and inspect the drum support rollers and blower wheel for wear and tear.
Routinely clean the lint filter after each load. Inspect and clean the vent system every 6-12 months to prevent blockages. Perform a comprehensive check-up annually or if you notice any issues with performance.
The "HE" error code indicates a heating error. Check the circuit breaker and ensure the dryer is receiving power. Inspect the vent system for blockages and clean the lint filter. If the problem continues, professional repair may be required.
To deactivate the child lock, press and hold the "Temp" and "Time" buttons simultaneously for 3 seconds until the lock icon disappears from the display.
The dryer might stop if the door is not properly closed, if there is a power interruption, or if the thermal fuse has blown. Check these potential issues and reset the circuit breaker if necessary.
To prevent wrinkles, promptly remove clothes from the dryer at the end of the cycle. Use the "Wrinkle Prevent" option if available, which intermittently tumbles clothes after the cycle ends.
Ensure the dryer is plugged in and the circuit breaker is on. Check if the drive belt is broken or slipped off the drum. If necessary, contact a professional technician for further diagnosis and repair.