Samsung DMR57LFB User Manual
![Samsung DMR57LFB Dishwasher manual cover](/images/TgjkOjnaZYDWtuwKAilGtTOm/thumbs/thumb175x175.webp)
To reset your Samsung DMR57LFB dishwasher, press and hold the Start/Reset button until the lights turn off. This process might take a few seconds. Ensure that the dishwasher is not in the middle of a cycle when attempting to reset.
Check for any blockages in the drain hose or filter. Ensure that the drain hose is not kinked and inspect the filter for debris. Clean the filter and check the garbage disposal connection if applicable.
To clean the filter, remove the lower rack and locate the filter at the bottom of the dishwasher. Twist the filter counterclockwise to remove it, then rinse it under running water to remove any debris. Reinstall the filter by twisting it clockwise until secure.
Spots can be caused by hard water. Use a rinse aid to help with drying and reduce water spots. Ensure that you are using the correct amount of detergent and check that the water temperature is set to at least 120°F (49°C) for optimal cleaning.
The "OE" error code indicates an overflow error. Check for water leaks and ensure the water inlet valve is functioning properly. Additionally, inspect the float switch for obstructions or damage.
It's recommended to clean the spray arms every 2-3 months. Remove them by unscrewing the caps, rinse under warm water, and use a toothpick to clear any blocked holes. Reattach securely before using the dishwasher.
Unusual noises can be caused by items obstructing the spray arms or loose hardware. Ensure dishes do not block the spray arms and check that all screws and components are tightly secured.
To improve drying performance, use a rinse aid and select the heated dry option. Ensure that the dishwasher is not overloaded, allowing proper air circulation around the dishes.
Regular maintenance includes cleaning the filter monthly, checking and cleaning the spray arms every 2-3 months, and inspecting the door gasket for debris or damage. Run an empty cycle with vinegar to remove buildup every few months.
Refer to your user manual to locate the water hardness adjustment settings. Typically, you can adjust it using the control panel by entering the settings menu and selecting the appropriate hardness level based on your local water supply.