Samsung C7000 Series User Manual V2
en
2010 Samsung Electronics Co., Ltd. All rights reserved. BN68-02627A-07
LED TV user m anual
LED TV user manual
imagine the possibilities Thank you for purchasing this Samsung product. To receive more complete service, please register your product at www.samsung.com/register Model _____________Serial No. _____________
Contact SAMSUNG WORLDWIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center.
Comment contacter Samsung dans le monde Si vous avez des suggestions ou des questions concernant les produits Samsung, veuillez contacter le Service Consommateurs Samsung.
Comunquese con SAMSUNG WORLDWIDE Si desea formular alguna pregunta o comentario en relacin con los productos de Samsung, comunquese con el centro de atencin al cliente de SAMSUNG.
Country Customer Care Center Web Site Address CANADA 1-800-SAMSUNG (726-7864) www.samsung.com Samsung Electronics Canada Inc., Customer Service
55 Standish Court Mississauga, Ontario L5R 4B2 Canada
U.S.A 1-800-SAMSUNG (726-7864) www.samsung.com Samsung Electronics America, Inc. 85 Challenger Road Ridgefield Park, NJ 07660-2112
[UC7000-NA]BN68-02627A-07L03.indb 1 2010-08-31 3:51:34
2 English
Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance. Product design and specifications may be changed without notice.
Important Warranty Information Regarding Television Format Viewing
See the warranty card for more information on warranty terms. Wide screen format LED Displays (16:9, the aspect ratio of the screen width to height) are primarily designed to view wide screen format full-motion video. The images displayed on them should primarily be in the wide screen 16:9 ratio format, or expanded to fill the screen if your model offers this feature and the images are constantly moving. Displaying stationary graphics and images on screen, such as the dark sidebars on no expanded standard format television video and programming, should be limited to no more than 5% of the total television viewing per week. Additionally, viewing other stationary images and text such as stock market reports, video game displays, station logos, web sites or computer graphics and patterns, should be limited as described above for all televisions. Displaying stationary images that exceed the above guidelines can cause uneven aging of LED Displays that leave subtle, but permanent burned-in ghost images in the LED picture. To avoid this, vary the programming and images, and primarily display full screen moving images, not stationary patterns or dark bars. On LED models that offer picture sizing features, use these controls to view different formats as a full screen picture. Be careful in the selection and duration of television formats used for viewing. Uneven LED aging as a result of format selection and use, as well as burned in images, are not covered by your Samsung limited warranty. SAMSUNG ELECTRONICS NORTH AMERICAN LIMITED WARRANTY STATEMENT
Subject to the requirements, conditions, exclusions and limitations of the original Limited Warranty supplied with Samsung Electronics (SAMSUNG) products, and the requirements, conditions, exclusions and limitations contained herein, SAMSUNG will additionally provide Warranty Repair Service in the United States on SAMSUNG products purchased in Canada, and in Canada on SAMSUNG products purchased in the United States, for the warranty period originally specified, and to the Original Purchaser only.
The above described warranty repairs must be performed by a SAMSUNG Authorized Service Center. Along with this Statement, the Original Limited Warranty Statement and a dated Bill of Sale as Proof of Purchase must be presented to the Service Center. Transportation to and from the Service Center is the responsibility of the purchaser. Conditions covered are limited only to manufacturing defects in material or workmanship, and only those encountered in normal use of the product.
Excluded, but not limited to, are any originally specified provisions for, in-home or on-site services, minimum or maximum repair times, exchanges or replacements, accessories, options, upgrades, or consumables.
For the location of a SAMSUNG Authorized Service Center, please call toll-free: In the United States : 1-800-SAMSUNG (1-800-726-7864) In Canada : 1-800-SAMSUNG
Still image warning
Avoid displaying still images (such as jpeg picture files) or still image elements (such as TV channel logos, panorama or 4:3 image format, stock or news bars at screen bottom etc.) on the screen. Constant displaying of still picture can cause ghosting of LED screen, which will affect image quality. To reduce risk of this effect, please follow below recommendations: Avoid displaying the same TV channel for long periods. Always try to display a full screen image. Reducing brightness and contrast will help to avoid the appearance of after-images. Use all TV features designed to reduce image retention and screen burn, refer to proper user manual section for details.
Securing the Installation Space
Keep the required distances between the product and other objects (e.g. walls) to ensure proper ventilation. Failing to do so may result in fire or a problem with the product due to an increase in the internal temperature of the product.
When using a stand or wall-mount, use parts provided by Samsung Electronics only. x If you use parts provided by another manufacturer, it may result in a problem with the product or an injury due to the product falling.
The appearance may differ depending on the product.
Be careful when you contact the TV because some parts can be somewhat hot.
Installation with a stand. Installation with a wall-mount.
4 inches
4 inches4 inches 4 inches
4 inches
4 inches
4 inches
[UC7000-NA]BN68-02627A-07L03.indb 2 2010-08-31 3:51:35
3
Contents E
N G
LIS H
English
Getting Started
y List of Features ......................................................... 4 y Accessories .............................................................. 4 y Install the Stand ........................................................ 5 y Viewing the Control Panel ......................................... 6 y Viewing the Remote Control ...................................... 7 y Connecting to an Antenna ........................................ 8 y Plug & Play (Initial Setup) ........................................... 8
Connections
y Connecting to an AV Device ...................................... 9 y Connecting to an Audio Device ............................... 11 y Connecting to a PC ................................................ 12 y Changing the Input Source ..................................... 13
Basic Features
y How to Navigate Menus .......................................... 13 y Channel Menu ....................................................... 14
Seeing Channels 14 Using Favorite Channels 14 Memorizing Channels 14 Editing Channels 15 Other Features 15
y Picture Menu .......................................................... 16 Changing the Preset Picture Mode 16 Adjusting Picture Settings 16 Economical Solutions 16 Changing the Picture Options 17 Viewing TV using the 3D function 19 Setting up the TV with Your PC 22
y Sound Menu ........................................................... 22 Changing the Preset Sound Mode 22 Adjusting Sound Settings 22 Sound Settings 23
y Setup Menu ............................................................ 24 Setting the Time 24 Using the Sleep Timer 24 Setting the On / Off Timer 24 Locking Programs 25 Other Features 26 Picture In Picture (PIP) 28
y Support Menu ......................................................... 28
Advanced Features
y Network Connection ............................................... 30 Connecting to a Wired Network 30 Connecting to a Wireless Network 32
y Media Play .............................................................. 37 Connecting a USB Device 37 Connecting to your PC through a network 37 Screen Display 39 Playing Multiple Files 42 Media Play - Additional Functions 42
y Anynet+ .................................................................. 44 Setting Up Anynet+ 45 Switching between Anynet+ Devices 45 Recording 46 Listening through a Receiver 46 Troubleshooting for Anynet+ 47
y Internet@TV ............................................................ 48 Getting Started with Internet@TV 48 Setting up Internet@TV 49 Using the Internet@TV service 51 PROFILE Widget 53 Widget Gallery 53 Troubleshooting for Internet@TV 54
y AllShare .................................................................. 55 About AllShare 55 Setting Up AllShare 55
Other Information
y Assembling the Cables ........................................... 57 y Installing the Wall Mount ......................................... 58 y Anti-theft Kensington Lock ...................................... 59 y Securing the TV to the Wall ..................................... 60 y Troubleshooting ...................................................... 61
Storage and Maintenance 64 y License ................................................................... 64 y Specifications ......................................................... 65 y Dimensions ............................................................. 66 y Index ...................................................................... 67
Check the Symbol!
t TOOLS
Note Step by Step Guide This function can be used by pressing the
TOOLS button on the remote control. Indicates additional information. Check here for instructions on how to open
the relevant submenu within the OSD (on screen display).
[UC7000-NA]BN68-02627A-07L03.indb 3 2010-08-31 3:51:36
4
Getting Started
English
List of Features
y Excellent Digital Interface & Networking: With a built-in HD digital tuner, nonsubscription HD broadcasts can be viewed without a cable box / STB (Set-Top-Box) satellite receiver.
y Media Play: Allows you to play music files, pictures, and movies saved on a USB device (p. 37). y Internet@TV: You can use various internet services and view useful information and entertaining content (p. 48). y AllShare: AllShare connects your TV and compatible Samsung mobile phones/devices through a network (p. 55). y Self Diagnosis: You can check whether picture or sound operate normally (p. 28). y 3D: This exciting new feature enables you to view 3D content (p. 18).
Accessories
Please make sure the following items are included with your LED TV. If any items are missing, contact your dealer.
The items' colors and shapes may vary depending on the models.
y Remote Control (BN68-01055A) & Batteries (AAA x 2) y Owners Instructions
y Cleaning Cloth (BN63-01798B) y Warranty Card / Safety Guide / Quick Setup Guide
Blanking Bracket & Screw (1EA) Cable Tie Holder-Wire (3EA)
(BN63-06543A) (BN61-05596A) (BN61-05373A)
Holder-Wire stand Holder-Ring (4EA) Antenna Adapter
(BN61-05491A) (BN61-05280A) (BN39-01154P)
AV Adapter Component Sound in Adapter LAN Adapter
(BN39-01154H) (BN39-01154G) (BN39-01154L)
Component Adapter PC Adapter Optical Adapter (BN39-01154C) (BN39-01154K) (BN39-01154M)
(M4 X L8)
[UC7000-NA]BN68-02627A-07L03.indb 4 2010-08-31 3:51:38
5
01 G
etting S tarted
English
Install the Stand
See separate guide for installing the stand.
s s
s
s
s
Stand (1EA) Guide Stand (1EA) Screws (9EA)
Follow the steps below to connect the TV to the stand.
1. Connect the Guide Stand to the Stand using four screws (M4 X L8) as shown.
s s
s
s
s s
2. With your TV upright, connect the TV to the Stand. 3. Fasten two screws (M4 X L8) at position 1, and then fasten three screws (M4 X L8) at position 2.
NOTE
x Make sure to distinguish between the front and back of the Stand and Guide Stand when assembling them.
x Make sure that at least two persons lift and move the LED TV.
x Stand the product up and fasten the screws. If you fasten the screws with the LED TV placed down, it may lean to one side.
s s
s
s s
Top view
Rear
Front
Rear
Guide Stand
Screws (M4 X L8)
Stand
(M4 X L8)
Screws (M4 X L8)
s
s
s
s
s
1
2
Input Cables (Sold Separately)
HDMI HDMI-DVI Component Composite (AV) Coaxial (RF) VGA
[UC7000-NA]BN68-02627A-07L03.indb 5 2010-08-31 3:51:41
6
Getting Started
English
For best cable connection to this product, be sure to use cables with a maximum thickness as below:
y Maximum thickness - 0.55 inches (14mm)
Viewing the Control Panel
The product color and shape may vary depending on the model.
External electrical noise or contact with objects other than your finger may switch on the LED touchpad.
Remote control sensor Aim the remote control towards this spot on the TV. Power Indicator Blinks and turns off when the power is on and lights up in standby mode. SOURCEE Toggles between all the available input sources. In the on-screen menu, use this
button as you would use the ENTERE button on the remote control. MENUm Displays an on-screen menu, the OSD (on screen display) of your TVs features.
y Adjusts the volume. In the OSD, use the y buttons as you would use the and buttons on the remote control.
z Changes the channels. In the OSD, use the z buttons as you would use the and buttons on the remote control.
P (Power) Turns the TV on or off.
Standby mode
Do not leave your TV in standby mode for long periods of time (when you are away on a holiday, for example). A small amount of electric power is still consumed even when the power button is turned off. It is best to unplug the power cord.
Power Indicator
Remote control sensor
Speakers
[UC7000-NA]BN68-02627A-07L03.indb 6 2010-08-31 3:51:42
7
01 G
etting S tarted
English
Viewing the Remote Control
Installing batteries (Battery size: AAA)
NOTE
x Use the remote control within 23 feet from the TV.
x Bright light may affect the performance of the remote control. Avoid use when nearby fluorescent lights or neon signs.
x The color and shape may vary depending on the model.
SOURCE POWER ON/OFF
PRE-CH
CONTENT
MEDIA.P YAHOO!
P.SIZEFAV.CH CC
MUTE
TOOLS
RETURN EXIT
INFO
MENU
CH LIST
INTERNET @ TV
A C DB
Turns the TV on and off.
Returns to the previous channel.
Cuts off the sound temporarily.
Displays the channel list on the screen (p. 14).
Changes channels.
Turns the remote control light on or off. When on, the buttons become illuminated for a moment when pressed. (Using the remote control with this button set to ON will reduce the battery usage time.)
Link to various internet services (p. 48).
Displays information on the TV screen.
Selects the on-screen menu items and changes the values seen on the menu.
Exits the menu.
MEDIA.P: Displays Media Play (p. 37). YAHOO!: Runs the Yahoo widget. (p. 52). 3D: Sets the 3D mode. (p. 20). FAV.CH: Displays Favorite Channel Lists on the screen (p. 14). P.SIZE: Selects the picture size (p. 18). CC: Controls the caption decoder (p. 26).
Press to directly access channels.
Press to select additional channels (digital) being broadcasted by the same station. For example, to select channel 54-3, press 54, then press and
3.
Adjusts the volume.
Brings up the OSD.
Displays and selects the available video sources (p. 13).
Displays the Content View, which includes Channel List, Internet@TV,
Media Play, AllShare and 3D.
Quickly select frequently used functions.
Returns to the previous menu.
Buttons used in the Channel List, Internet@TV, Media Play menu, etc.
Use these buttons in Media Play and Anynet+ modes (p. 37, 44).
(: Controls recording for Samsung recorders that have the Anynet+ feature)
[UC7000-NA]BN68-02627A-07L03.indb 7 2010-08-31 3:51:42
8
Getting Started
English
Connecting to an Antenna
When the TV is initially powered on, basic settings proceed automatically.
Connecting the power cord and antenna.
Plug & Play (Initial Setup)
When the TV is initially powered on, a sequence of on-screen prompts will assist in configuring basic settings. Press the POWERP button. Plug & Play is available only when the Input source is set to TV.
To return to the previous step, press the Red button.
1 Selecting a language Press the or button, then press the ENTERE button. Select the desired OSD (On Screen Display) language. P
POWER
INFO GUIDE2 Selecting Store Demo or Home Use
Press the or button, then press the ENTERE button. y Select the Home Use mode. Store Demo mode is for retail
environments. y To return the units settings from Store Demo to Home Use
(standard): Press the volume button on the TV. When you see the volume OSD, press and hold MENU for 5 sec.
3 Selecting an antenna Press the or button, then press the ENTERE button. Select Air, Cable or Auto.
4 Selecting a channel Press the or button, then press the ENTERE button. Select the channel source to memorize. When setting the antenna source to Cable, a step appears allowing you to assign numerical values (channel frequencies) to the channels. For more information, refer to Channel Auto Program (p. 14).
Press the ENTERE button at any time to interrupt the memorization process.
5 Setting the Clock Mode
Set the Clock Mode automatically or manually. y Auto: Allows you to select DST (Daylight Saving Time) mode and time zone. y Manual: Allows you to manually set the current date and time (p. 24).
6 View the HD Connection Guide
The connection method for the best HD screen quality is displayed.
7 Enjoy the TV. Press the ENTERE button.
If You Want to Reset This Feature...
O MENUm Setup Plug & Play ENTERE
ANT OUT
VHF/UHF Antenna
Antenna Adapter (Supplied)
or
Cable Antenna Cable (Not Supplied)
[UC7000-NA]BN68-02627A-07L03.indb 8 2010-08-31 3:51:43
9English
02 C
onnections
Connections Connecting to an AV Device
Using an HDMI or HDMI/DVI Cable: HD connection (up to 1080p)
We recommend using the HDMI connection for the best quality HD picture. Available devices: DVD, Blu-ray player, HD cable box, HD STB (Set-Top-Box) satellite receiver
HDMI IN 1(DVI), 2(ARC), 3, 4, PC/DVI AUDIO IN
x For better picture and audio quality, connect to a digital device using an HDMI cable.
x An HDMI cable supports digital video and audio signals, and does not require an audio cable. To connect the TV to a digital device that does not support HDMI output, use an HDMI/DVI and audio cables.
x The picture may not display normally (if at all) or the audio may not work if an external device that uses an older version of HDMI mode is connected to the TV. If such a problem occurs, ask the manufacturer of the external device about the HDMI version and, if out of date, request an upgrade.
x Be sure to use an HDMI cable with a thickness of 14 mm or less.
x Be sure to purchase a certified HDMI cable. Otherwise, the picture may not display or a connection error may occur.
x A basic high-speed HDMI cable or one with ethernet is recommended. This product does not support the ethernet function via HDMI.
x This product supports the 3D and ARC (Audio Return Channel) functions via an HDMI cable. Note that the ARC function is supported by the HDMI IN 2(ARC) port only. If 3D Auto View is set to On, some functions such as Internet@TV may be disabled. In this case, set 3D
Auto View or 3D Mode to Off.
x The ARC function allows digital audio to output via the HDMI IN 2(ARC) port. It can be enabled only when the TV is connected with an audio receiver that supports the ARC function.
HDMI OUT
DVI OUT
R-AUDIO-L
AUDIO OUT WR
Device
Device
WhiteRed
HDMI to DVI Cable (Not Supplied)
Audio Cable (Not Supplied)
HDMI Cable (Not Supplied)
[UC7000-NA]BN68-02627A-07L03.indb 9 2010-08-31 3:51:43
10 English
Connections Using a Component (up to 1080p) or Audio/Video (480i only) Cable
Available devices: DVD, Blu-ray player, cable box, STB satellite receiver, VCR
For better picture quality, the Component connection is recommended over the A/V connection.
Using an EX-Link Cable Connection
Available Devices: External devices that support EX-Link.
EX-LINK: Connector for service only.
R G
B
R B G
Y
Y
W R
WRWR
W R
PR PB Y
COMPONENT OUT VIDEO OUTAUDIO OUT
R-AUDIO-L
AUDIO OUT
R-AUDIO-L
YWRWR R GB
DeviceDevice
Red White Red RedBlue WhiteGreen Yellow
AV Adapter (Supplied)
Component Adapter (Supplied)
Audio Cable (Not Supplied) Component Cable
(Not Supplied)
Audio Cable (Not Supplied)
Video Cable (Not Supplied)
Component Sound in Adapter (Supplied)
[UC7000-NA]BN68-02627A-07L03.indb 10 2010-08-31 3:51:44
11English
02 C
onnections
Connecting to an Audio Device
Using an Optical (Digital) or Audio (Analog) Cable Connection
Available devices: Digital Audio System, Amplifier, DVD home theater
DIGITAL AUDIO OUT (OPTICAL)
x When a Digital Audio System is connected to the DIGITAL AUDIO OUT (OPTICAL) jack, decrease the volume of both the TV and the system.
x 5.1 CH (channel) audio is available when the TV is connected to an external device supporting 5.1 CH.
x When the receiver (home theater) is set to on, you can hear sound output from the TVs optical jack. When the TV is receiving a DTV signal, the TV will send 5.1 CH sound to the home theater receiver. When the source is a digital component such as a DVD / Blu-ray player / cable box / STB (Set-Top-Box) satellite receiver and is connected to the TV via HDMI, only 2 CH audio will be heard from the home theater receiver. If you want to hear 5.1 CH audio, connect the digital audio out jack from your DVD / Blu-ray player / cable box / STB satellite receiver directly to an amplifier or home theater.
AUDIO OUT: Connects to the audio input jacks on your amplifier/DVD home theater.
x When connecting, use the appropriate connector.
x When an audio amplifier is connected to the AUDIO OUT jacks: Decrease the volume of the TV and adjust the volume level with the amplifiers volume control.
Red White
OPTICAL
WR
R-AUDIO-L
AUDIO IN
Optical Adapter (Supplied)
Audio Cable (Not Supplied)
Optical Cable (Not Supplied)
Amplifier / DVD home theater
Digital Audio System
[UC7000-NA]BN68-02627A-07L03.indb 11 2010-08-31 3:51:45
12 English
Connections Connecting to a PC
Using an HDMI/DVI cable or a D-sub cable
AUDIO OUT
PC OUT
AUDIO OUT
DVI OUT
Display Modes (D-Sub and HDMI/DVI Input)
Optimal resolution is 1920 X 1080 @ 60 Hz.
Mode Resolution Horizontal Frequency
(KHz) Vertical Frequency
(Hz) Pixel Clock Frequency
(MHz) Sync Polarity
(H / V)
IBM 640 x 350 720 x 400
31.469 31.469
70.086 70.087
25.175 28.322
+/- -/+
MAC 640 x 480 832 x 624
1152 x 870
35.000 49.726 68.681
66.667 74.551 75.062
30.240 57.284
100.000
-/- -/- -/-
VESA CVT
720 x 576 1152 x 864 1280 x 720 1280 x 960
35.910 53.783 56.456 75.231
59.950 59.959 74.777 74.857
32.750 81.750 95.750
130.000
-/+ -/+ -/+ -/+
VESA DMT
640 x 480 640 x 480 640 x 480 800 x 600 800 x 600 800 x 600
1024 x 768 1024 x 768 1024 x 768 1152 x 864
1280 x 1024 1280 x 1024 1280 x 720 1280 x 800 1280 x 800 1280 x 960 1360 x 768 1440 x 900 1440 x 900
1680 x 1050
31.469 37.861 37.500 37.879 48.077 46.875 48.363 56.476 60.023 67.500 63.981 79.976 45.000 49.702 62.795 60.000 47.712 55.935 70.635 65.290
59.940 72.809 75.000 60.317 72.188 75.000 60.004 70.069 75.029 75.000 60.020 75.025 60.000 59.810 74.934 60.000 60.015 59.887 74.984 59.954
25.175 31.500 31.500 40.000 50.000 49.500 65.000 75.000 78.750
108.000 108.000 135.000 74.250 83.500
106.500 108.000 85.500
106.500 136.750 146.250
-/- -/- -/- +/+ +/+ +/+ -/- -/- +/+ +/+ +/+ +/+ +/+ -/+ -/+ +/+ +/+ -/+ -/+ -/+
VESA GTF 1280 x 720
1280 x 1024 52.500 74.620
70.000 70.000
89.040 128.943
-/+ -/-
VESA DMT / DTV CEA 1920 x 1080p 67.500 60.000 148.500 +/+
NOTE
x For HDMI/DVI cable connection, you must use the HDMI IN 1(DVI) jack.
x The interlace mode is not supported.
x The set may operate abnormally if a non-standard video format is selected.
x Separate and Composite modes are supported. SOG(Sync On Green) is not supported.
PC Adapter (Supplied)
HDMI to DVI Cable (Not Supplied)
D-Sub Cable (Not Supplied)
Audio Cable (Not Supplied)
[UC7000-NA]BN68-02627A-07L03.indb 12 2010-08-31 3:51:46
13English
02 C
onnections
Changing the Input Source
Source List Use to select TV or an external input sources such as a DVD / Blu-ray player / cable box / STB satellite receiver.
O MENUm Input Source List ENTERE
TV / PC / AV / Component / HDMI1/DVI / HDMI2 / HDMI3 / HDMI4 / USB
You can only choose external devices that are connected to the TV. In the Source List, connected inputs will be highlighted.
In the Source List, PC is always activated.
Edit Name
O MENUm Input Edit Name ENTERE
VCR / DVD / Cable STB / Satellite STB / PVR STB / AV Receiver / Game / Camcorder / PC / DVI PC / DVI Devices / TV / IPTV / Blu-ray / HD DVD / DMA: Name the device connected to the input jacks to make your input source selection easier.
When a PC with a resolution of 1920 x 1080 @ 60Hz is connected to the HDMI IN 1(DVI) port, you should set the TV to DVI PC mode under Edit Name.
When connecting an HDMI/DVI cable to the HDMI IN 1(DVI) port, you should set the TV to DVI PC or DVI Devices mode under Edit Name.
SOURCE
Basic Features How to Navigate Menus
Before using the TV, follow the steps below to learn how to navigate the menu and select and adjust different functions.
POWER SOURCE
ON/OFF
PRE-CH
CONTENT
MEDIA.P YAHOO
P.SIZEFAV.CH CC
3D
MUTE
TOOLS INFO
CH LIST
INTERNET @ TV
A B C D
4
1
2
3 RETURN EXIT
MENU
1 MENU button: Displays the main on-screen menu.
2 ENTERE / Direction button: Move the cursor and select an item. Confirm the setting.
3 RETURN button: Returns to the previous menu.
4 EXIT button: Exits the on-screen menu.
How to Operate the OSD (On Screen Display)
The access step may differ depending on the selected menu.
1 MENUm The main menu options appear on the screen: Picture, Sound, Channel, Setup, Input, Application, Support.
2 / Select an icon with the or button.
3 ENTERE Press ENTERE to access the sub-menu.
4 / Select the desired submenu with the or button.
5 / Adjust the value of an item with the or button. The adjustment in the OSD may differ depending on the selected menu.
6 ENTER E Press ENTERE to confirm the selection.
7 EXIT e Press EXIT.
[UC7000-NA]BN68-02627A-07L03.indb 13 2010-08-31 3:51:47
14 English
Basic Features Channel Menu
Seeing Channels
Channel List Add, delete or set Favorite channels and use the program guide for digital broadcasts.
O MENUm Channel Channel List
ENTERE
Select a channel in the All Channels, Added Channels, Favorite or Programmed screen by pressing the / and ENTERE buttons. Then you can watch the selected channel.
All Channels: Shows all currently available channels.
Added Channels: Shows all added channels.
* Favorite: Shows all favorite channels.
Programmed: Shows all currently reserved programs.
Using the color buttons with the Channel List
x Red (Antenna): Switches to Air or Cable.
x B Green (Zoom): Enlarges or shrinks a channel number.
x Yellow (Select): Selects multiple channel lists. Select desired channels and press the Yellow button to set all the selected channels at the same time. The c mark appears to the left of the selected channels.
x k (Page): Move to next or previous page.
x T (Tools): Displays the Channel List option menu. (The options menus may differ depending on the situation.)
Channel Status Display Icons
Icons Operations c A channel selected.
* A channel set as a Favorite.
) A reserved Program.
Using Favorite Channels
O MENUm Channel Channel List ENTERE
Add to Favorite / Delete from Favorite t Set channels you watch frequently as Favorites. 1. Select a channel and press the TOOLS button.
2. Add or delete a channel using the Add to Favorite or Delete from Favorite menu respectively.
To show all Favorite channels, click on the button shown on the right.
Memorizing Channels
O MENUm Channel ENTERE
Antenna (Air / Cable) t Before your television can begin memorizing the available channels, you must specify the type of signal source that is connected to the TV (i.e. an Air or a Cable system).
Auto Program
Air: Air antenna signal.
Cable: Cable antenna signal.
Auto: Air and Cable antenna.
CH LIST
FAV.CH
6 Air 6-1 * TV #6
7 Air 8 Air 9 Air 9-1 * TV #9 10 Air 10-1 * TV #10 11-1 * TV #11
Air Antenna B Zoom Select kPage T Tools
Added Channels
6 Air 6-1 * TV #6
7 Air 8 Air 9 Air 9-1 * TV #9 10 Air 10-1 * TV #10 11-1 * TV #11
Air Antenna B Zoom Select kPage T Tools
Added Channels Delete
Add to Favorite Timer Viewing Channel Name Edit Select All
[UC7000-NA]BN68-02627A-07L03.indb 14 2010-08-31 3:51:49
15English
03 B
asic Features
NOTE
x When selecting the Cable TV system: STD, HRC and IRC identify various types of cable TV systems. Contact your local cable company to identify the type of cable system that exists in your particular area. At this point, the signal source has been selected.
x After all the available channels are stored, it starts to remove scrambled channels. The Auto Program menu then reappears.
Editing Channels
O MENUm Channel Channel List ENTERE
Channel Name Edit
1. Select a channel and press the TOOLS button.
2. Edit the channel name using the Channel Name Edit menu.
Channel Name Edit (analog channels only): Assign your own channel name.
Other Features
O MENUm Channel ENTERE
Clear Scrambled Channel This function is used to filter out scrambled channels after Auto Program is completed. This process may take up to 20~30 minutes.
How to Stop Searching Scrambled Channels
1. Press the ENTERE button to select Stop.
2. Press the button to select Yes.
3. Press the ENTERE button.
This function is only available in Cable mode.
Channel List
Channel List Option Menu
Set each channel using the Channel List menu options (Add / Delete, Timer Viewing, Select All / Deselect All). Option menu items may differ depending on the channel status. 1. Select a channel and press the TOOLS button.
2. Select a function and change its settings.
Add / Delete: Delete or add a channel to display the channels you want.
NOTE
x All deleted channels will be shown on the All Channels menu.
x A gray-colored channel indicates the channel has been deleted.
x The Add menu only appears for deleted channels.
x Delete a channel from the Added Channels or Favorite menu in the same manner.
Timer Viewing: You can set a desired channel to be displayed automatically at the reserved time. Set the current time first to use this function.
1. Press the / / / buttons to select the desired channel in Channel List.
2. Press the TOOLS button, then select Timer Viewing.
3. Scroll up or down to adjust the settings in the box, or use the numeric buttons on your remote to enter the date and time.
If you selected Once, Every Week or EveryDay in Repeat you can enter the date you want.
4. Select OK, then press the ENTERE button when done.
NOTE
x Only memorized channels can be reserved.
x Reserved programs will be displayed in the Programmed menu.
x When a digital channel is selected, press the button to view the digital program.
Select All: Select all the channels in the channel list.
Deselect All: Deselect all the selected channels.
You can only select Deselect All when one or more channels are selected.
Programmed (in Channel List) You can view, modify or delete a show you have reserved to watch. Programmed timer viewing is displayed here. Highlight a program and press the TOOLS button to display Options.
Change Info: Change a show you have reserved to watch. Begin with step 3 of Timer Viewing above.
Cancel Schedules: Cancel a show you have reserved to watch.
This deletes the highlighted or selected program(s).
[UC7000-NA]BN68-02627A-07L03.indb 15 2010-08-31 3:51:49
16 English
Basic Features Information: Display a show you have reserved
to watch. (You can also change the reservation Information.)
Alternatively, you can view Information by highlighting a program and pressing the ENTERE button.
Select All / Deselect All: Select or deselect all reserved programs.
Fine Tune (analog channels only) If the reception is clear, you do not have to fine tune the channel, as this is done automatically during the search and store operation. If the signal is weak or distorted, fine tune the channel manually. Scroll to the left or right until the image is clear.
Settings are applied to the channel you're currently watching.
Fine tuned channels that have been saved are marked with an asterisk * on the right-hand side of the channel number in the channel banner.
To reset the fine-tuning, select Reset.
Picture Menu
Changing the Preset Picture Mode
O MENUm Picture Mode ENTERE
Mode t Select your preferred picture type.
Dynamic: Suitable for a bright room.
Standard: Suitable for a normal environment.
Natural: Suitable for reducing eye strain.
Natural is not available in PC mode.
Movie: Suitable for watching movies in a dark room.
Adjusting Picture Settings
O MENUm Picture ENTERE
Backlight / Contrast / Brightness / Sharpness / Color / Tint (G/R) Your television has several setting options for picture quality control.
NOTE
x When you make changes to Backlight, Contrast, Brightness, Sharpness, Color or Tint (G/R) the OSD will be adjusted accordingly.
x In PC mode, you can only make changes to Backlight, Contrast and Brightness.
x Settings can be adjusted and stored for each external device connected to the TV.
Economical Solutions
The Eco Function can be used to enhance your power savings.
Eco Solution
O MENUm Picture Eco Solution ENTERE
Energy Saving (Off / Low / Medium / High / Picture Off / Auto): This adjusts the brightness of the TV in order to reduce power consumption. If you select Picture Off, the screen is turned off, but the sound remains on. Press any button except the volume button to turn on the screen.
Eco Sensor (Off / On): To enhance your power savings; the picture settings will automatically adapt to the light in the room.
If you adjust the Backlight, the Eco Sensor will be set to Off.
Min Backlight: When Eco sensor is On, the minimum screen brightness can be adjusted manually.
If Eco Sensor is On, the display brightness may change (become slightly darker in most cases) depending on the surrounding light intensity.
No Signal Power Off (Off / 15 min. / 30 min. / 60 min.): To avoid unnecessary energy consumption, set how long you want the TV to remain on if it's not receiving a signal.
Disabled when the PC is in power saving mode.
[UC7000-NA]BN68-02627A-07L03.indb 16 2010-08-31 3:51:50
17English
03 B
asic Features
Changing the Picture Options
Advanced Settings
O MENUm Picture Advanced Settings ENTERE
(Advanced Settings are available in Standard / Movie mode) Compared to previous models, new Samsung TVs have a more precise picture.
In PC mode, you can only make changes to Dynamic Contrast, Gamma, White Balance and LED Motion Plus.
Black Tone (Off / Dark / Darker / Darkest): Select the black level to adjust the screen depth.
Dynamic Contrast (Off / Low / Medium / High): Adjust the screen contrast.
Shadow Detail (-2~+2): Increase the brightness of dark images.
Gamma: Adjust the primary color intensity.
Expert Pattern (Off / Pattern1 / Pattern2): By running the Expert Pattern function, the picture can be calibrated. If the OSD menu disappears or a menu other than the Picture menu is opened, the calibration is saved and the Expert Pattern window disappears.
Off: Turns the Expert Pattern function off. Pattern1: This is a test screen designed to demonstrate the affects of display settings on shades. Pattern2: This is a test screen designed to demonstrate the affects of display settings on colors.
After selecting Pattern1 or Pattern2, you can adjust any of the advanced settings to the desired effect.
While the Expert Pattern is running, sound is not output.
Only enabled in DTV, Component and HDMI modes.
RGB Only Mode (Off / Red / Green / Blue): Displays the Red, Green and Blue color for making fine adjustments to the hue and saturation.
Color Space (Auto / Native / Custom): Adjust the range of colors available to create the image. To adjust Color, Red, Green, Blue and Reset, set Color Space to Custom.
White Balance: Adjust the color temperature for a more natural picture.
R-Offset / G-Offset / B-Offset: Adjust each color's (red, green, blue) darkness. R-Gain / G-Gain / B-Gain: Adjust each color's (red, green, blue) brightness. Reset: Resets the White Balance to it's default settings.
10p White Balance (Off / On): Controls the white balance in 10 point intervals by adjusting the red, green, and blue brightness.
Available when the picture mode is set to Movie and when the external input is set to all input.
Some external devices may not support this function.
Interval: Select interval to adjust. Red: Adjust the red level. Green: Adjust the green level. Blue: Adjust the blue level. Reset: Resets the 10p White Balance to its default settings.
Flesh Tone: Emphasize pink Flesh Tone.
Edge Enhancement (Off / On): Emphasize object boundaries.
xvYCC (Off / On): Setting the xvYCC mode on increases detail and color space when watching movies from an external device (e.g. BD/DVD player) connected to the HDMI or Component IN jacks.
Available when the picture mode is set to Movie and when the external input is set to HDMI or Component.
Some external devices may not support this function.
LED Motion Plus (Off / On): Removes drag from fast scenes with a lot of movement to provide a clear picture.
Advanced Settings Black Tone : Off Dynamic Contrast : Medium Shadow Detail : -2 Gamma : 0 Expert Pattern : Off RGB Only Mode : Off Color Space : Native
U Move E Enter R Return
[UC7000-NA]BN68-02627A-07L03.indb 17 2010-08-31 3:51:50
18 English
Basic Features Picture Options
O MENUm Picture Picture Options ENTERE
In PC mode, you can only make changes to the Color Tone, Size and Auto Protection Time.
Color Tone (Cool / Normal / Warm1 / Warm2)
Warm1 or Warm2 will be deactivated when the picture mode is Dynamic.
Settings can be adjusted and stored for each external device connected to an input on the TV.
Size: Your cable box/satellite receiver may have its own set of screen sizes as well. However, we highly recommend you use 16:9 mode most of the time.
16:9 : Sets the picture to 16:9 wide mode. Zoom1: Use for moderate magnification. Zoom2: Use for a stronger magnification. Wide Fit: Enlarges the aspect ratio of the picture to fit the entire screen.
Available with HD 1080i / 720p signals in 16:9 mode.
4:3 : Sets the picture to basic (4:3) mode. Do not watch in 4:3 format for a long time. Traces
of borders displayed on the left, right and center of the screen may cause image retention(screen burn) which are not covered by the warranty.
Screen Fit: Displays the full image without any cut-off when HDMI (720p / 1080i / 1080p) or Component (1080i / 1080p) signals are inputted.
NOTE
x When Double (, ) mode has been set in PIP (Picture-in-Picture), the Picture Size cannot be set.
x After selecting Zoom1, Zoom2 or Wide Fit: 1. Press the button to select Position.
2. Press the ENTERE button.
3. Press the or button to move the picture up or down.
4. Press the ENTERE button.
5. Press the button to select Reset.
6. Press the ENTERE button to reset the picture to its default position.
x After selecting Screen Fit in HDMI (1080i/1080p) or Component (1080i/1080p) mode, you may need to center the picture: 1. Press the or button to select Position.
2. Press the ENTERE button.
3. Press the , , or button to move the picture.
4. Press the ENTERE button.
5. Press the or button to select Reset.
6. Press the ENTERE button.
x HD (High Definition): 16:9 - 1080i/1080p (1920x1080), 720p (1280x720)
x Settings can be adjusted and stored for each external device you have connected to an input on the TV.
Input Source Picture Size ATV, AV, Component (480i, 480p)
16:9, Zoom1, Zoom2, 4:3
DTV(1080i), Component (1080i, 1080p), HDMI (720p, 1080i, 1080p)
16:9, 4:3, Wide Fit, Screen Fit
PC 16:9, 4:3
Digital Noise Filter (Off / Low / Medium / High / Auto / Auto Visualization): If the broadcast signal received by your TV is weak, you can activate the Digital Noise Filter feature to reduce any static and ghosting that may appear on the screen.
When the signal is weak, try other options until the best picture is displayed.
Auto Visualization: When changing analog channels, displays signal strength.
Only available for analog channels.
When bar is green, you are receiving the best possible signal.
P.SIZE
Picture Options Color Tone : Normal Size : 16:9 Digital Noise Filter : Auto MPEG Noise Filter : Auto HDMI Black Level : Normal Film Mode : Off Auto Motion Plus : Standard
U Move E Enter R Return
[UC7000-NA]BN68-02627A-07L03.indb 18 2010-08-31 3:51:51
19English
03 B
asic Features
MPEG Noise Filter (Off / Low / Medium / High / Auto): Reduces MPEG noise to provide improved picture quality.
HDMI Black Level (Normal / Low): Selects the black level on the screen to adjust the screen depth.
Available only in HDMI mode.
Film Mode (Off / Auto1 / Auto2): Sets the TV to automatically sense and process film signals from all sources and adjusts the picture for optimum quality.
Available in TV, AV, COMPONENT (480i / 1080i) and HDMI (480i / 1080i).
Auto Motion Plus (Off / Clear / Standard / Smooth / Custom / Demo): Removes drag from fast scenes with a lot of movement to provide a clearer picture.
The info screen on your TV displays the resolution and frequency of the incoming video signal (60 Hz). This displayed frequency is not what the TV is displaying by using the Auto Motion Plus function.
If noise occurs on the screen, please set the Auto Motion Plus to Off. If Auto Motion Plus is Custom, you can set up the Blur Reduction, Judder Reduction or Reset manually.
If Auto Motion Plus is Demo, you can compare the difference between on and off modes.
Blur Reduction: Adjusts the blur reduction level from video sources. Judder Reduction: Adjusts the judder reduction level from video sources when playing films. Re