Lenovo ThinkPad E490 Hardware Maintenance Manual

To reset your Lenovo ThinkPad E490 to factory settings, go to 'Settings' > 'Update & Security' > 'Recovery'. Under 'Reset this PC', click 'Get started' and follow the prompts to reset your laptop.
First, ensure the battery is charged or connect the laptop to a power source. Press and hold the power button for 10 seconds to perform a hard reset. If the issue persists, check for any hardware damage or visit a service center.
To improve battery life, reduce screen brightness, turn off Bluetooth and Wi-Fi when not in use, close unnecessary applications, and use the 'Battery Saver' mode available in Windows settings.
Power down the laptop and unplug it. Use a can of compressed air to blow out debris. Lightly dampen a microfiber cloth with a 70% isopropyl alcohol solution and gently wipe the keys. Avoid letting liquid drip into the keyboard.
You can update drivers via 'Device Manager' by right-clicking the device and selecting 'Update driver'. Alternatively, use Lenovo Vantage software to automatically detect and install the latest drivers.
Ensure that the vents are not blocked and clean any dust using compressed air. Place the laptop on a hard, flat surface to improve airflow. Consider using a cooling pad and checking for any demanding processes using Task Manager.
Connect the external monitor using an HDMI cable. Press 'Windows + P' to open the display settings menu and select the desired display mode, such as 'Duplicate' or 'Extend'.
Check if Wi-Fi is enabled and airplane mode is off. Restart the router and laptop. Update the Wi-Fi driver through 'Device Manager'. If issues persist, use the 'Network Troubleshooter' in Windows.
Turn off and unplug the laptop. Remove the back panel by unscrewing the screws. Locate the RAM slot, unclip the existing RAM, and insert the new RAM module at an angle before pressing it down to lock it in place. Reassemble the laptop.
Power off the laptop and remove the back panel. Locate the existing storage drive and unscrew it. Replace it with a new SSD or HDD, ensuring the connectors align. Secure the new drive and reattach the back panel.