Lenovo IdeaCentre 700-25ISH Hardware Maintenance Manual
![Lenovo IdeaCentre 700-25ISH Computer manual cover](/images/YhSvBEmHYPVCujyojdBhTCYb/thumbs/thumb175x175.webp)
To recover your Lenovo IdeaCentre 700-25ISH, press the Novo button, located on the side or back of the device, to access the Novo Button Menu. Select 'System Recovery' and follow the on-screen instructions to restore your system.
Ensure that the vents are not blocked and the computer is placed on a hard, flat surface for optimal airflow. Use a can of compressed air to clean dust from the vents and consider using a cooling pad.
Power off your computer and unplug all cables. Open the case by removing the screws on the back panel. Locate the RAM slots and insert the new RAM modules, ensuring they are seated properly. Reassemble the case and reconnect all cables.
Unusual noises may indicate a failing fan or hard drive. Check for any obstructions in the fans, and ensure that all components are securely fastened. If the noise persists, consider seeking professional service.
Regularly update your operating system and drivers, remove unnecessary startup programs, and defragment your hard drive. Also, consider upgrading to an SSD for faster performance.
Check the connection between the monitor and the computer, ensuring cables are secure. Test with another monitor if possible. If the issue persists, it may be a graphics card problem that requires professional repair.
To reset the BIOS password, you need to remove the CMOS battery from the motherboard for a few minutes and then reinsert it. This will reset the BIOS settings, including the password.
Ensure that your wireless adapter is enabled. Go to the Network settings, select the Wi-Fi option, and choose your network from the list. Enter the password to connect.
Check the power cable and ensure it is connected properly. Try a different power outlet or use another power cable. If the issue persists, the power supply might be faulty and require replacement.
To perform a factory reset, go to Settings > Update & Security > Recovery. Under 'Reset this PC', click 'Get started' and follow the instructions to reset your computer to its original factory settings.