Lenovo 700 Ultraportable Bluetooth User Guide

To pair your speaker, turn on the Bluetooth function on your device. Turn on the speaker and press the Bluetooth button until the LED starts blinking. Select 'Lenovo 700 Speaker' from the list of available devices on your device to complete the pairing process.
First, ensure that the speaker is charged. Connect it to a power source using the provided USB cable. If it still doesn't turn on, try resetting the speaker by pressing and holding the power button for 10 seconds.
To reset the speaker, press and hold the power button for about 10 seconds until the LED light flashes and the speaker turns off. Release the button, and the speaker will reset to factory settings.
Poor sound quality can be due to low battery or interference. Ensure that the speaker is fully charged and keep it within range of the connected device. Check for any obstructions between the speaker and the device.
To update the firmware, download the latest version from the Lenovo support website. Connect the speaker to your computer via USB, and use the provided software tool to install the update. Follow the on-screen instructions carefully.
The Lenovo 700 Speaker offers up to 8 hours of playtime on a full charge, depending on the volume level and audio content.
Yes, you can use the speaker while it is charging. Simply connect it to a power source and continue enjoying your audio experience without interruption.
To clean the speaker, use a soft, dry cloth to gently wipe the surface. Avoid using any liquids or abrasive cleaners, as these can damage the speaker's finish.
Ensure that the speaker is in pairing mode and within range of the Bluetooth device. Remove any previous pairings on your device and try again. If the issue persists, reset the speaker and attempt to pair once more.
The Lenovo 700 Speaker is not water-resistant. It should be kept away from water and moisture to avoid damage.