JennAir JES1750FS User Guide
![JennAir JES1750FS Range manual cover](/images/NkkeWcdXBcrjkTvsgqvBrBXs/thumbs/thumb175x175.webp)
To clean your JennAir JES1750FS Range, use a soft cloth with mild soap and water. Avoid abrasive cleaners and pads which can scratch the surface. For the oven, use the self-clean function by removing all racks and setting the oven to the self-clean cycle.
If the oven is not heating properly, first check that it is properly connected to a power source. Ensure that the circuit breakers are not tripped. If the issue persists, it may be a faulty heating element, and a professional technician should inspect the range.
To set the clock, press the 'Clock' button and use the 'Up' or 'Down' arrow keys to set the correct time. Once set, press the 'Clock' button again to confirm the time.
To maintain the stainless steel finish, clean it regularly with stainless steel cleaner or a mixture of vinegar and water. Wipe in the direction of the grain to prevent streaks.
Refer to the user manual for specific error codes. Generally, error codes can be resolved by resetting the range's power. If the error persists, contact JennAir customer support.
While you can use aluminum foil to catch drips, avoid covering the entire oven surface as it can restrict airflow and affect cooking results. Do not line the oven bottom with foil.
Ensure even baking by preheating the oven to the desired temperature. Use the convection setting if available, and avoid opening the door frequently during baking.
If the control panel is unresponsive, try resetting the power by unplugging the range or turning off the circuit breaker for a few minutes. If the issue persists, the control panel may need professional servicing.
To replace the oven light bulb, ensure the oven is off and cool. Remove the bulb cover by turning it counterclockwise, replace the bulb with a new one of the same type, and screw the cover back on.
Yes, you can lock the oven controls by pressing and holding the 'Control Lock' button for three seconds. This prevents accidental usage of the controls.