Husqvarna Automower 520H Quick Guide

To install the boundary wire, lay the wire around the perimeter of the mowing area, ensuring it forms a complete loop back to the charging station. Keep the wire flat against the ground and secure it with the provided stakes. Avoid sharp angles and obstacles to ensure smooth operation.
First, check that the charging station is connected to a power source. Ensure the boundary wire is correctly connected to the charging station and not broken. Inspect the charging contacts on both the mower and the station for debris and clean them if necessary.
Connect the Automower to the Automower Connect app via Bluetooth or cellular connection. Follow the on-screen instructions to check for updates and install them directly through the app.
Regular maintenance includes cleaning the mower and charging station, checking and replacing blades as needed, and inspecting the boundary wire for damage. It's also important to update the firmware and check battery health periodically.
Random stops can be caused by obstacles, incorrect boundary wire setup, or depleted battery. Check for physical blockages, ensure the boundary wire is properly installed, and verify the battery charge level.
Yes, the Automower 520H is designed to operate in the rain. However, mowing in heavy rain is not recommended as it may lead to poor cutting performance and increased wear.
To adjust the cutting height, use the control panel on the mower. Navigate to the settings menu, select 'Cutting Height,' and adjust to the desired level using the plus and minus buttons.
If the mower gets stuck, carefully lift it from the obstacle. Check the area for uneven terrain or obstacles and make necessary adjustments to the lawn or boundary wire placement.
To winterize, clean the mower thoroughly, remove the battery, and store it in a dry place. Disconnect the charging station and store it indoors. Inspect the boundary wire for any damage and repair if necessary.
Ensure the boundary wire is intact and properly connected. Check for breaks or damage along the wire. Also, verify that the wire is laid out according to the installation guidelines, avoiding sharp bends and ensuring a continuous loop.