Husqvarna Automower 420 Quick Guide
![Husqvarna Automower 420 Lawn Mower manual cover](/images/zpqTFjFxkqpeJprNkCEmlzEz/thumbs/thumb175x175.webp)
Ensure the mower is fully charged, place it within the boundary wire, and press the start button. Follow the on-screen instructions for initial setup.
Check if the boundary wire is properly connected and intact. Ensure there are no obstacles blocking the mower's path. Verify the guide wire is correctly installed.
It's recommended to change the blades every 1-2 months depending on usage frequency and lawn conditions to maintain optimal cutting performance.
Ensure the blades are sharp and properly installed. Check if the mowing area is correctly mapped and there are no obstacles or inclines affecting the coverage.
Connect the mower to a stable Wi-Fi network and use the Automower Connect app to check for and install firmware updates.
Clean the mower thoroughly, remove and store the battery in a dry place, and keep the mower indoors in a cool, dry environment.
Use the height adjustment knob located on the mower. Turn it clockwise to increase height and counterclockwise to decrease.
Check for error messages on the display, ensure the battery is charged, and verify there are no obstructions or boundary wire issues.
Regularly clean the mower, keep the blades sharp, and avoid using the mower in excessively wet conditions to reduce strain on the battery.
The Automower 420 can handle slopes up to 24 degrees. Ensure the boundary wire is installed properly to guide the mower on slopes.