Hoover HOT1151B User Instructions
![Hoover HOT1151B manual cover](/images/YxVraZtZuqtMFuROtZtZJVGp/thumbs/thumb175x175.webp)
To clean the filter, open the bottom panel of the machine, remove the filter, and wash it under running water. Ensure it's completely dry before reinserting.
Check if the appliance is properly plugged in and the power switch is turned on. Also, ensure that the door is fully closed and latched.
Inspect the door seal for any damage or debris. Check the hose connections and ensure they are tight. If the issue persists, contact customer support.
Ensure the machine is on a level surface and all transit bolts have been removed. Distribute the laundry evenly inside the drum.
To reset the machine, turn off the power and unplug it for about 5 minutes. Plug it back in and turn it on.
Check for blockages in the drain hose and the filter. Ensure the hose is not kinked and is at the correct height.
Regularly clean the detergent drawer, door seal, and filter. Run an empty hot wash cycle with a descaler monthly.
Refer to the user manual for specific error code meanings. Commonly, restarting the machine or checking connections can resolve issues.
Yes, use the delicate wash cycle and ensure to use a mild detergent. Avoid overloading the drum to prevent damage to fabrics.
Leave the door slightly open after each wash to allow the interior to dry. Regularly clean the door seal and detergent drawer.