Hoover HODP0007BI User Instructions
![Hoover HODP0007BI manual cover](/images/LcMIPHNYKnmEbcgZocENdeHR/thumbs/thumb175x175.webp)
To clean the filter, first remove the bottom rack. Locate the filter at the bottom of the dishwasher, twist it counterclockwise and lift it out. Rinse the filter under running water to remove any debris and replace it by aligning it back into the slot and twisting it clockwise until it locks into place.
Check if the drain hose is kinked or clogged. Make sure the sink drain is not blocked. Clean the dishwasher filter to ensure it's not obstructed. If the issue persists, check the drain pump for any blockages or contact a service technician.
Ensure that the dishwasher is level on the floor. Check for any loose items or utensils that may be vibrating inside. Inspect the spray arms to ensure they are not hitting any objects. Tighten any loose screws or fasteners on the dishwasher.
Use a soft, damp cloth with mild detergent to wipe the exterior surface of the dishwasher. Avoid using abrasive cleaners or pads as they can scratch the surface. For stainless steel models, a stainless steel cleaner may be used.
Ensure that the dishwasher door is fully closed and latched. Check that the appliance is plugged in and that the circuit breaker is not tripped. Verify that the water supply is turned on. If the problem continues, reset the dishwasher by turning it off and on again.
Yes, you can use dishwasher tablets in the detergent dispenser of the Hoover HODP0007BI. Ensure that the tablet fits properly in the dispenser and close the lid securely before starting the wash cycle.
It is recommended to clean the spray arms every 1-3 months, depending on usage. Remove the spray arms and rinse them under running water to remove any blockages. Use a toothpick or thin brush to clear any clogged spray holes.
Place larger items like pots and pans in the bottom rack, ensuring they do not block the spray arms. Load plates and bowls at an angle to allow water flow. Use the top rack for glasses, cups, and smaller items. Avoid overcrowding to ensure effective cleaning.
Ensure that the rinse aid dispenser is filled, as it helps improve drying. Select a longer drying cycle if available. Avoid opening the door immediately after the cycle ends to allow steam to escape and facilitate drying.
Run a cleaning cycle with a dishwasher cleaner or a mixture of vinegar and baking soda. Clean the filter, spray arms, and door seals thoroughly. Ensure that food debris is not left in the dishwasher after each cycle.